Shopping Cart
/

User Manual DZGH002/DZGH003

 

User Manual English Version
hướng dẫn sử dụng

 

หม้อต้มน้ำไฟฟ้า

คู่มือการใช้



ข้อควรระวังเพื่อความปลอดภัย

  1. โปรดอ่านอย่างระมัดระวังและปฏิบัติตามข้อควรระวังเพื่อความปลอดภัยดังต่อไปนี้ก่อนใช้งาน
  2. ผลิตภัณฑ์จะต้องใช้ร่วมกับสายไฟที่ให้มา และห้ามใช้สายไฟอื่นๆ
  3. เช็ดรอยน้ำที่ฝาด้านล่างของตัวหม้อให้แห้งก่อนใช้งาน
  4. อยู่เคียงข้างในขณะที่ผลิตภัณฑ์กำลังทำงาน อย่าทิ้งผลิตภัณฑ์ไว้โดยไม่มีใครดูแลเพื่อหลีกเลี่ยงอุบัติเหตุ
  5. วางผลิตภัณฑ์ให้พ้นมือเด็กหรือผู้พิการทางสมองเพื่อป้องกันการโดนลวก
  6. เมื่อใช้งาน ให้วางผลิตภัณฑ์บนพื้นผิวเรียบ ไม่ใกล้กับแหล่งความร้อนอื่น หรือบนเครื่องใช้ไฟฟ้าอื่นๆ
  7. เมื่อผลิตภัณฑ์ทำงาน ห้ามสัมผัสไอน้ำที่ปล่อยออกมาจากฝาครอบกระจกเพื่อป้องกันการโดนลวก
  8. อย่าเติมน้ำเกินระดับน้ำสูงสุดเพื่อป้องกันไม่ให้น้ำเดือดกระเด็นและลวกคน ไม่ต่ำกว่าระดับน้ำขั้นต่ำเพื่อหลีกเลี่ยงความเสียหายของผลิตภัณฑ์ที่เกิดจากการเผาไหม้แห้งของแผ่นความร้อน ปิดฝาแก้วเมื่อน้ำเดือด
  9. สำหรับการใช้งานครั้งแรกให้เติมน้ำจนถึงระดับน้ำสูงสุดแล้วต้มน้ำให้เดือดแล้วเทออกเพื่อทำความสะอาดตัวหม้อ
  10. ห้ามแขวนสายไฟไว้รอบๆ โต๊ะ หรือสัมผัสกับวัตถุร้อน
  11. ห้ามจุ่มหม้อน้ำลงในน้ำหรือของเหลวอื่นๆ เพื่อทำความสะอาดเพื่อหลีกเลี่ยงการลัดวงจร
  12. โปรดใช้ปลั๊กไฟที่มีแรงดันไฟฟ้าที่สอดคล้องกับแรงดันไฟฟ้าที่ระบุบนป้ายชื่อผลิตภัณฑ์
  13. ในกรณีที่สายไฟเสียหาย จะต้องเปลี่ยนด้วยสายไฟแบบยืดหยุ่นพิเศษหรือส่วนประกอบพิเศษที่ซื้อจากผู้ผลิตหรือแผนกบำรุงรักษา
  14. ไม่สามารถเชื่อมต่อแหล่งจ่ายไฟภายใต้เงื่อนไขต่อไปนี้: ไม่มีน้ำในหม้อขนาดใหญ่ เมื่อเติมน้ำ ทำความสะอาด หรือเคลื่อนย้ายผลิตภัณฑ์
  15. ในกรณีที่มีข้อบกพร่องใด ๆ โปรดส่งสินค้าไปที่ศูนย์บำรุงรักษาพิเศษเพื่อทำการบำรุงรักษาก่อนใช้งาน ผู้ใช้ห้ามซ่อมแซมด้วยตนเอง เพื่อหลีกเลี่ยงอันตรายจากไฟฟ้า โปรดอย่าถอดฝาครอบด้านล่างหรือสายไฟด้วยตัวเอง
  16. ผลิตภัณฑ์นี้ใช้ได้เฉพาะในอาคารหรือในสถานที่ที่คล้ายกันเท่านั้น



แผนผังโครงสร้างผลิตภัณฑ์

หมายเหตุ: รูปวาดผลิตภัณฑ์ใช้สำหรับอ้างอิงเท่านั้น และจะขึ้นอยู่กับผลิตภัณฑ์หรืออุปกรณ์เสริมจริง

ใช้วิธี

ต้มน้ำ

  1. ถอดฝาครอบ เติมน้ำสะอาด ไม่ต่ำกว่าระดับน้ำต่ำสุดหรือสูงกว่าระดับน้ำสูงสุด จากนั้นปิดฝาครอบ
  2. เสียบปลั๊กไฟเข้ากับแหล่งจ่ายไฟ หมุนปุ่มสวิตช์ไปที่ "II" ไฟแสดงสถานะจะสว่างขึ้น และผลิตภัณฑ์จะเริ่มทำความร้อน
  3. หลังจากประมาณ 10 นาที น้ำเริ่มเดือด หมุนปุ่มสวิตช์ไปที่ "ปิด" ไฟแสดงสถานะจะดับลง และผลิตภัณฑ์จะหยุดร้อน

 

ทำบะหมี่

  1. ถอดฝาครอบ เติมน้ำสะอาด ไม่ต่ำกว่าระดับน้ำต่ำสุดหรือสูงกว่าระดับน้ำสูงสุด จากนั้นปิดฝาครอบ
  2. เสียบปลั๊กไฟเข้ากับแหล่งจ่ายไฟ หมุนปุ่มสวิตช์ไปที่ "II" ไฟแสดงสถานะจะสว่างขึ้น และผลิตภัณฑ์จะเริ่มทำความร้อน
  3. หลังจากประมาณ 10 นาที เมื่อน้ำเริ่มเดือด ใส่บะหมี่ลงในหม้อและอุณหภูมิของน้ำจะลดลง หลังจากที่น้ำเดือดอีกครั้ง ให้เติมเครื่องปรุงและผสมให้เข้ากัน หมุนปุ่มสวิตช์ไปที่ "ปิด" ไฟแสดงสถานะจะดับลง และผลิตภัณฑ์จะหยุดร้อน

 

หม้อไฟ

  1. ถอดฝาครอบ เติมน้ำสะอาด ไม่ต่ำกว่าระดับน้ำต่ำสุดหรือสูงกว่าระดับน้ำสูงสุด จากนั้นปิดฝาครอบ
  2. เสียบปลั๊กไฟเข้ากับแหล่งจ่ายไฟ หมุนปุ่มสวิตช์ไปที่ "II" ไฟแสดงสถานะจะสว่างขึ้น และผลิตภัณฑ์จะเริ่มทำความร้อน
  3. ประมาณ 10 นาที เมื่อน้ำเริ่มเดือด ใส่วัสดุหม้อไฟลงในหม้อและปรุงอาหาร จากนั้นคุณสามารถเพลิดเพลินกับอาหารหลังการปรุงอาหาร หากต้องการลดกำลังไฟ ให้หมุนปุ่มสวิตช์ไปที่ "I" หากคุณไม่ต้องการให้ความร้อน ให้หมุนปุ่มสวิตช์ไปที่ "ปิด" แล้วปิดแหล่งจ่ายไฟ

 

ฟังก์ชั่นทำอาหาร (จานร้อน)

  1. นำฝาแก้วออก เติมน้ำในปริมาณที่เหมาะสม ใส่ตะแกรงนึ่งลงในหม้อ จากนั้นใส่ไข่ขาวและไข่แดงคนให้เข้ากันในกล่อง ใส่กล่องบนชั้นนึ่ง แล้วปิดฝาแก้ว
  2. เสียบปลั๊กไฟเข้ากับแหล่งจ่ายไฟ หมุนปุ่มสวิตช์ไปที่ "II" ไฟแสดงสถานะจะสว่างขึ้น และผลิตภัณฑ์จะเริ่มทำความร้อน
  3. หลังจากประมาณ 7-8 นาที น้ำเริ่มเดือด หลังจากที่ไข่นึ่งสุกดีแล้ว ให้หมุนปุ่มสวิตช์ไปที่กะที่เหมาะสมเพื่อให้ความร้อนที่อุณหภูมิคงที่เป็นระยะเวลาหนึ่ง หลังจากได้เอฟเฟกต์ที่ต้องการแล้ว ให้หมุนปุ่มสวิตช์ไปที่ "On/Off" แล้วปิดแหล่งจ่ายไฟ

 



 

Electric Caldron

User Manual



Safety Precautions

  1. Please read carefully and abide by the following safety precautions prior to use.
  2. The product shall be used together with the power cord supplied, and other power cords shall not be used.
  3. Dry the water marks on the bottom cover of the caldron body prior to use.
  4. Stay at the side while the product is working. Do not leave the product unattended to avoid accidents.
  5. Do not place the product within the reach of children or mentally handicapped persons to prevent scalding.
  6. When using, place the product on a flat surface, not close to other heat sources, nor on other electrical appliances.
  7. When the product is operating, do not touch the steam released from the glass cover to prevent scalding.
  8. Do not add water beyond the maximum water level to prevent boiling water from splashing out and scalding people; nor lower than the minimum water level to avoid product damage caused by dry burning of the heating plate. Cover the glass cover when boiling water.
  9. For using for the first time, add water to the maximum water level, and then boil the water and pour it out, to clean the caldron body.
  10. Do not hang the power cord around the table or contact hot objects.
  11. Do not immerse the caldron body in water or other liquids for cleaning to avoid short circuit.
  12. Please use the power socket with the voltage consistent with the voltage indicated on the product nameplate.
  13. In case of power cord damage, it must be replaced with a special flexible cord or a special component purchased from its manufacturer or maintenance department.
  14. The power supply cannot be connected under the following conditions: no water in the caldron, when adding water, cleaning or moving the product.
  15. In case of any fault, please send the product to the special maintenance center for maintenance prior to use. The user shall not repair it by himself. To avoid electrical hazards, please do not disassemble the bottom cover or the power cord by yourself.
  16. This product is only available for use indoors or in similar places.



Product Structure Diagram

Note: The product drawing is only for reference, and it shall be subject to the actual products or accessories.

Use Method

Boil water

  1. Remove the cover, add clean water, neither below the minimum water level nor above the maximum water level, and then cover the cover.
  2. Plug the power plug into the power supply, turn the switch knob to “II”, the indicator light goes on, and the product starts heating.
  3. After approx. 10 minutes, the water begins to boil. Turn the switch knob to “Off”, the indicator light goes off, and the product stops heating.

Cook noodles

  1. Remove the cover, add clean water, neither below the minimum water level nor above the maximum water level, and then cover the cover.
  2. Plug the power plug into the power supply, turn the switch knob to “II”, the indicator light goes on, and the product starts heating.
  3. After approx. 10 minutes, the water begins to boil. Put the noodles into the caldron and the water temperature reduces. After the water boils again, add seasoning and mix evenly. Turn the switch knob to “Off”, the indicator light goes off, and the product stops heating.

Hot pot

  1. Remove the cover, add clean water, neither below the minimum water level nor above the maximum water level, and then cover the cover.
  2. Plug the power plug into the power supply, turn the switch knob to “II”, the indicator light goes on, and the product starts heating.
  3. After about 10 minutes, the water begins to boil. Put the hot pot materials into the caldron and cook them. Then you can enjoy the food after cooking. To reduce the fire power, turn the switch knob to “I”. If you don't want to heat, turn the switch knob to “off” and turn off the power supply.

Cooking function (hot dish)

  1. Remove the glass cover, add proper amount of water, put the steaming rack in the caldron, then put the egg white and egg yolk stirred evenly in the box, put the box on the steaming rack, and cover the glass cover.
  2. Plug the power plug into the power supply, turn the switch knob to “II”, the indicator light goes on, and the product starts heating.
  3. After approx. 7-8 minutes, the water begins to boil. After the eggs are well steamed, turn the switch knob to a proper shift for constant temperature heating for a period of time. After reaching the desired effect, turn the switch knob to “On/Off” and turn off the power supply.