Shopping Cart
/

Cordless Portable Food Processor LLJH006 User Manual English Vesion

 

Ⅰ. Specification parameters

Product name

Cordless Portable Food Processor

 

 

 Product model

LLJH006

Charging time

About 4 hours

Rated voltage

3.7V

 Charging voltage

5V

Rated power

30W

 Charging current

1A

Work time

≦60S

 

 

 

Ⅱ. Product diagram

 

Ⅲ. Operation Instructions

  • Preparation before use
  1. Please clean the mixing rod before use;
  2. Put the ingredients to be stirred into the utensil;
  3. Before inserting the accessories, please ensure that the product is not in working state and the indicator light is not on;
  4. Insert the mixing rod into the jack of the machine head until the sound of "click" is the installation position.
  • Indicator light instruction

 Status

In charging

Full of electricity  

In the work

Battery power shortage

 Indication

Blinking red lamp

The blue lamp keeps on

The red light keeps on

The red light blinks 10 seconds.

  • Instructions for the use of accessories
  1. Egg white stick

    1)It is only suitable for mixing thin liquid ingredients, such as egg white (8 eggs at most at one time). If the effect of beating egg white is not good, it can be set to a higher gear until the ideal condition is reached.

    2)Mixing thick mixtures (such as fat and flour) will cause damage to the mixing stick and do not allow mixing thick mixtures;

    3)Product working time 1 minute, pause 30 seconds, intermittent work not more than 5 minutes

  2. Cream stick

1)Cream no more than 200g of butter, stirring time no more than 5 minutes; In the process of use, if the low resistance is large or the rotation is not smooth, you can set a higher gear until the ideal state is reached.

  • Operation

  1. Double-click the "switch button" and the product starts to work (in low gear).
  2. Click "Switch" again to enter the medium speed gear, click "Switch" again to enter the fast gear, click "Switch" for the third time to stop the work.
  3. Cycle operation according to the above process 1 and 2.
  4. After stirring, click the switch button to turn off state (the working light is off); Then pull out the mixing rod and clean the mixing rod.

. Cleaning and maintenance

  1. Product  can be washed directly with water, or wipe with a soft wet cloth.
  2. Cleaning products in the water to put the appropriate amount of detergent, cleaning with a clean pad, with warm water effect is better.
  3. The blade is very sharp and cannot be touched by hand. In order to avoid injury, the water should be very clear when cleaning, so that you can see the blade in the cleaning process.
  4. Cleaning can not be cleaned with abrasive or corrosive detergent.
  5. It is strictly prohibited to sterilize all parts of the product at high temperature.
  6. After cleaning the product, please dry or air each part of the product, and then reassemble it and put it away.
  7. If the product is not used for a long time, please charge and maintain the product within three months.

Ⅴ. Precautions

  1. This product is for wireless use. Please charge it before using it for the first time.
  2. The machine will work intermittently for 5 minutes. Let the machine cool down for 15-20 minutes before the next use. Otherwise, the service life of the machine will be shortened due to overheat.
  3. It is strictly prohibited to use metal brushes, nylon brushes, detergent powder, diluent and other supplies to clean the machine.
  4. It is strictly prohibited to disassemble, extrude, puncture, short-circuit or put the host in water, fire or in an environment with a temperature higher than 60℃.
  5. Please use this product in an environment where the temperature is 0-40℃. If you do not use it for a long time, please charge it once every three months to prevent battery damage. Please charge it in time.
  6. Please turn off the machine before installing and inserting the mixing rod; Please turn off the machine before cleaning.
  7. Please use the accessories that come with the machine. Otherwise, unnecessary injury may be caused.
  8. Before using the machine, ensure that all components are properly installed and securely locked.
  9. Do not wash or disinfect the product and accessories in the dishwasher, microwave oven, disinfection cabinet or hot water over 60 ° C. Do not use other equipment to heat the product to avoid deformation and damage.
  10. Do not place this product within the reach of children, and do not allow children and people who lack relevant knowledge and experience, physical disability, perception or mental disorders to use or play with it.
  11. Do not touch the rotating parts with fingers, clothes or hair when the product is working.
  12. This product is only suitable for personal or family use, not suitable for commercial use.
  13. Non-professional maintenance personnel, please do not repair or modify the machine by yourself, otherwise it may cause fire, leakage and abnormal operation of the machine.