CORDLESS VACUUM CLEANER XCQH013 USER MANUAL

SPECIFICATIONS

ILLUSTRATION

1. VC handle
2. Air outlet hole
3. Dust cup  
4. Dust cup release button
5. On off Switchbutton
6. Battery pack
7. Battery pack release button
8. HEPA Filter
9. Electric tube release button
10. Electric brush release button
11. Electric brush
12. Brush roller
13. Dust mite nozzle
14. Crevice nozzle
15. Small brush
16. Cleaning tool
17. Adapter
18. Wall dock
19. Screws
20. Release button for foldable tube

1. Charging indicator
2. Digital speed indicator
3. Round led lamp
4. Speed regulating indicator
5. On/Off switch button

ASSEMBLY

• Battery pack

Press the release buttons of the battery pack and match it into the top of the hand vacuum. The battery will click into position when correctly installed.

1. Press the release button of battery for matching.
2. Prevent battery from charging during assembling.

• Assemble the Tube and Motorized brush

Align and match the tube into hand vacuum until it clicks into position, then align and match the motorized brush into the tube until it clicks into position

• Accessories

Push the long crevice tool /2 in 1 brush to suction tube or hand vacuum until it clicks into place.

Note:

The crevice tool is suitable for cleaning narrow, slit or irregular object surface, such as corner, window slit, drawer, frame, keyboard, etc.

• Charging

Match the battery pack firstly. Plug the provided charger into the power outlet to charge the battery. The battery pack can also be removed to charge separately.

1. Press the release button to match the battery firstly.
2. Plug charger into the power outlet for charging.

Notice about charging

1. Please only use the original battery and charger. Do not use other replacement battery or charger.
2. When battery is lower than 10%, the round lamp led will flash, which reminds users to recharge the vacuum cleaner.  
3. During charging status, the round led lamp keeps flashing and charging indicator keeps bright. When battery is full charged, the round led lamp will keep bright for 1 minute, and then, round lamp will be distinguished.
4. When there is malfunction like blocked suction part or brush, the round lamp will become red.
5. The battery could be charged separately. If the battery is charged separately, the charging indicator keeps bright only 1 minute. After full charged, the charging indicator will extinguish.
6. Prevent the battery and charger from any shock or damage.
7. Keep the battery and charger away from water and any wet environments.
8. Put the battery pack at a dry and cool place when charging.
9. Do not put the battery and charger in hot environment over 50 degree. Prevent them from direct exposure to sunshine. Keep them away from heated surface and cigarettes.
10. Do not repair by yourself when the battery or charger is defective. Please contact the customer service team for help.

OPERATION

1. Please ensure vacuum cleaner has sufficient battery power before using. Please charge the device for 3.5 hours at first use. Press the ON/OFF button to switch on the power, and press again to switch off the vacuum cleaner
2. The default starting model is 2 speed.Touching the screen can adjust speed from minimum 1st to Maximum 6th level, and the digital number shows the working speed level.
3. The vacuum pressure increased gradually.
4. During working or discharging process, the round lamp keeps bright.

CLEANING AND MAINTENANCE

• Clean the dust cup

Turn off the vacuum cleaner, and press the release button to empty the dust cup.

1. Press the release button to clean the dust cup

2. Rotate the centric plastic filter to clean the dust

• Clean the inlet filters

After empty the dust cup first, and rotate the hepa cover to take out the hepa and sponge to clean the dusty. Wash the filters set under flowing water for deep cleaning, and dry the filters in air naturally.

Note: Install the filters when they are completely dry.

• Clean the floor brush

When turning on the unit, the green light of the floor brush will stay on.

To clean the floor brush, users need to turn off the vacuum cleaner, rotate the cover of roller brush as following picture, take out the roller brush, and clean the dusty or threads etc.

Press the button to take out the roller brush

• Storage

Install the wall-mounted tool on the wall with the screws in the package. Put the vacuum cleaner by inserting it into hole. The crevice tool and 2 in 1 brush can be stored on the wall mount as below picture.

CAUTION

1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
2. This appliance is designed for domestic use only.
3. Do not pull on the connection cord, but rather on the plug, to separate the appliance from the mains.
4. Do not use it outdoors.
5. Do not leave the appliance unattended when it is switched on, as this may be a source of danger.
6. Stand the appliance on a table or flat surface.
7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
8. Following objects are strictly banned, otherwise the vacuum cleaner will be damaged or fire calamity will be caused, which bring such accidents as human body injuries:

• Don’t pick up large or sharp fragmentssuch as glasses;
• Don’t pick up hazardous or erosive liquids (solvent, corrosive, detergent…);
• Don’t pick up inflammable or explosive substance such as gasoline or alcohol.

9. Check the device and connections regularly for visible damage. The device must not be used if the housing is damaged or other damage is present.
10. Never attempt to open the device or the mains adapter yourself or to replace the connecting cable. Always have repairs to the device carried out by a specialist workshop. There is considerable danger to the user if repairs are faulty.
11. Do not trap the mains adapter cable and when using the adapter, pay attention to where the cable is to prevent any danger of tripping over it. Keep the cable away from heated surfaces (e.g. cooker surfaces).
12. Do not touch the mains adapter and cable with wet hands.
13. Do not point the vacuum cleaner at persons or animals when in operation.
14. Only use the mains adapter on dry surfaces in buildings.
15. Only use the device with the accessories supplied.
16. Please keep these instructions in a safe place.
17. Use only with the provided adaptor.
18. The appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
19. This appliance includes Li-ion batteries; do not incinerate the batteries or expose to high temperatures, as they may explode.

TROUBLESHOOTING