SG/MY-CORDLESS WET DRY VACUUM CLEANER XDJH002 USER MANUAL

SPECIFICATIONS

ILLUSTRATION

①On/Off Button

②Gear Button

③Led Screen

④Sewage Tank Release Button

⑤Fresh Water Tank

⑥Sewage Tank

⑦Brush Roller Cover

⑧Wheels

⑨Brush Release Button

Charging base

①Charging Contact

②Charging Port

Screen

①Wet Mopping Mode

②Dry Mopping Mode

③Power Display/Error Code

④Powerful Mode

⑤Automatic Mode

⑥Sewage Tank Full

⑦Charging

⑧Water Shortage In Fresh Water Tank

⑨Self-Cleaning 

⑩Electrolyzed Water (Optional)

ASSEMBLY

❗Screws and screwdrivers are packed in PE bags and tied to the handles

OPERATION

1. Full charge before first use. Press the on/offbutton for 2 seconds to turn on the device. Press again for 2 seconds to turn off the device.
2. Cleaning mode:
   The product’s default mode is wet mopping mode; long press the gear button to switch to dry mopping mode; and then short press the button into wet mopping mode;
   Short press the button to enter the powerful mode, short press again to cancel.

①on/off button

②gear button

3. After use, place the device vertically on the charging base for charging and storage.

MAINTENANCE

1. Self-cleaning

The self-cleaning function can only be activated when the device is charging and the battery level is over 5%.

Make sure the device is upright on the charging base and the fresh water tank is full.

Short press the on/off button, then the self-cleaning indicator on the screen will light up and start self-cleaning.

After self-cleaning is completed, the device will continue to charge. Please clean the sewage tank in time.

2. Freshwater tank cleaning

Press the fresh water tank release button and remove it from the device to clean it.

3. Sewagetank cleaning

Press the sewage tank release button and remove it from the device as shown. 

Hold the tank with one hand, and pull up the lid with the other, then use the filter scoop to separate wet and dry waste.

4. Remove the filter from the top of thesewage Rinse the filter with clean water. Dry thoroughly before reinstalling.

5. Brush Roller Cover cleaning

Press the button and pull up to remove the brush roller cover. Rinse with clean water.

6. Brush Roller cleaning

Press the brush release button and pull the brush outward to rinse with water. Dry thoroughly before reinstalling.

CAUTION

1. Use only as described in this User's Guide. Use only attachments recommended by the manufacturer.
2. Use only on indoor non-carpeted floor surfaces.
3. Do not usethe charger with wet hands.
4. Do not submerge the device in liquids.
5. Do not use without a filter.
6. Prevent accidental activation. Make sure the switch is off before picking up or carrying the appliance.
7. The appliance is not intended for use by children of 8 years oldand under, and persons with reduced physical, sensory or mental abilities or lack of experience and knowledge.
8. Always clean the dirty water tank after each use to avoid potential clogging and to prolong the life of the appliance.
9. Store properly in a dry indoor area after use.
10. Do not use the appliance when the water depth exceeds 5mm.
11. Do not expose the appliance to fire or high temperature to avoid explosion.