Shopping Cart
/

Electric Blender LLJH010 User Manual English Version

Ⅰ. Product parameters

Product Name

Model NO.

Rated Voltage

Rated Frequency

Rated Power

Electric Blender

LLJH010

220-240V~

50-60Hz

300W

Ⅱ. Components and installation drawings

  1. Main engine
  2. Lid
  3. Cup cover
  4. Mixingcup
  5. Cross bladebase
  6. Small mouth cover
  7. Portable lid
  8. Portable cup
  9. Mason lid
  10. The rooster cup
  11. Straw

Ⅲ. Operation Instructions

  • Blend
  1. Put the machine on a stable table.
  2. Firstly adding an appropriate amount of purified water in the blending cup , then put the vegetables and fruits which have been cut into small pieces in the blending cup ,pay attention that the whole mixed volume can not exceed 600ml of the portable cup, 1000ml of the big cup, 2/3 the whole capacity of the rooster cup.
  3. Screw on the cross blade at the bottom of the blending cup .
  4. Put the blending cup on the main engine and be sure the upper concave parts fix well to the convex parts on the cup , then tighten it clockwise.
  5. Plug in the appliance into 220-240 voltage.At that time,the appliance runs normallyandcan finish grinding in 60 seconds
  6. Twist the switch knob and be sure the indication light is blue. At that time,the appliance runs normally.
  • P--Pulse,can blend the food more completely;
  • 0--OFF;
  • 1,--Low speed
  • 2,-High speed
  • Note:
  1. Do not mix dry ingredients only.
  2. After mixing, please turn off the power switch, then pull the power plug from outlet.
  3. Take off the mixing cup from main body counterclockwisely.
  4. Open the blade seat ,pour the ingredients out, then you can enjoy yourself.
  5. For repeat operation, please do it according to above steps.

Ⅳ. Cleaning, maintenance and storage 

  1. You should always take off the plug when not in use.
  2. If the machine is not use for long time, please keep the machine in dry and airiness.
  3. You can clean the accessories in water except the motor base.
  4. Take off the plug before wipe the motor base, always use the dry cloth to clean, never flush or dip in water.

Ⅴ. Precautions

  1. Toavoid risk of electric shock, never immerse the cord, plug, or power base blender in water or other liquids.
  2. The use of attachments not recommended or sold by the manufacture may cause fire,electric shock, or injury.
  3. Unplug the appliance when it is not use. Make sure the appliance is unplugged beforeassembling, disassembling, adding additional parts, and cleaning.
  4. Do not pull, twist, or mistreat the power cord.
  5. Do not allow cord to hang over the side of the counter or table.
  6. Do not allow cord to touch hot surfaces, including stove.
  7. Periodically inspect cord and plug for damage. Do not operate any appliance with a damaged cord or plug. If the appliance malfunctions, or is dropped or damaged in any manner, discontinue use. Contact customer service for assistance in obtaining a replacement.
  8. Avoid contact with operating parts.
  9. Keep hands and utensils away from the cutting blade while chopping or blending food to reduce the risk of severe personal injury or damage to the device.
  10. Never allow the motor to run for more time, as it can cause permanent damage to the motor and other parts. If the motor stops working,unplug the Power base and let it cool for twenty minutes before attempting to use it again. Your appliance has an internal thermal breaker that shuts off the unit when it overheats. The Power Base will reset when the unit is unplugged and the thermal breaker cools down.
  11. To reduce the risk of injury, make sure the blade is securely screwed onto the container beforeplacing it on to Power Base and operating the appliance.
  12. Never leave the appliance unattended while it is in use.
  13. Close supervision is necessary when any appliance is used by or near children.
  14. Do not use the appliance outdoors if exposed to inclement weather elements such as rain or in wet conditions.
  15. Blades are sharp. Handle carefully.
  16. Check gasket to make sure it is completely seated in cross blade or flat blade unite before each use.
  17. The appliance is not intended for use in the microwave. Do not place the cup, containers,Power Base or accessories in the microwave as this may result in damage to the appliance.
  18. To reduce the risk of personal injury or damaged to the device, keep hands and utensils away from the cutting blade.
  19. Never blend carbonated beverages. Built-cup pressure from released gases can cause container to burst, resulting in possible injury.
  20. Do not blend the hot liquids in any of the blending vessels.
  21. Do not run the appliance when the containers are empty.