SG/MY-ELECTRIC COOKER DZGH010 User Manual

Ⅰ. Product Parameters

Ⅱ. Product Display

1. Glass cover
2. Steamers (optional)
3. Inner bladder
4. Anti-scald shell
5. Gear knob
6. Power cord

Ⅲ. Instructions

1. When the knob points to "0/off", the product is not powered on, the indicator light does not light up, and the product won’t heat;
2. When the knob points to "Ⅰ", the product is powered on, the indicator light will be on. At this time, the product is heated slowly at low power;
3. When the knob points to "Ⅱ", the product is powered on, the indicator light will be on. At this time, the product is heated quickly with high power;
4. If the indicator light suddenly does not light up when the power is on, there are two reasons for this situation: first is that the pot sticks, and the second is that there is no water in the pot body so that the pot body automatically activates the anti-overheating mode. Under this case, it will automatically reheat in one to three minutes.
5. To ensure your safety, if you stop using the product, be sure to turn the knob to "0/off".

• Boiling water

1. Remove the lid and add clean water. The water level should be neither lower than the lowest water level nor higher than the highest water level.Then close the lid.
2. Plug the power plug into the power supply and adjust the switch knob to "Ⅱ". The indicator light will light up and the product will start to heat.
3. After about 10 minutes, the water begins to boil. Turn the switch knob to "off", the indicator light will go out, and the product will stop heating.

• Cooking noodles

1. Remove the lid and add clean water. The water level should be neither lower than the lowest water level nor higher than the highest water level.Then close the lid.
2. Plug the power plug into the power supply and adjust the switch knob to "Ⅱ". The indicator light will light up and the product will start to heat.
3. After about 10 minutes, the water starts to boil. Put the noodles in the pot and then water cools down. 3. After the water boils again, add seasonings and stir it evenly.Turn the switch knob to “off”, the indicator light will go out, and the product will stop heating.

• Making hot pot

1. Remove the lid and add clean water. The water level should be neither lower than the lowest water level nor higher than the highest water level.Then close the lid.
2. Plug the power plug into the power supply and adjust the switch knob to "Ⅱ". The indicator light will light up and the product will start to heat.
3. After about 10 minutes, the water begins to boil. Add the side dishes to the pot and enjoy after they are cooked. If you want to reduce the heat, turn the switch knob to "Ⅰ". If you don't want to heat, turn the switch knob to "Off" and turn off the power.

• Steaming (reheating dishes)

1. Remove the glass lid and add appropriate amount of water, then place the steaming rack in the pot. Mix the egg whites and yolks evenly and put them in a vegetable box, then place it on the steaming rack and cover the glass lid.
2. Plug the power plug into the power supply and adjust the switch knob to "Ⅱ". The indicator light will light up and the product will start to heat.
3. After about 7-8 minutes, the water begins to boil. After eggs are steamed well, turn the switch knob to a suitable place and heat at a constant temperature for a period of time. When the desired effect is achieved, turn the switch knob to "0/off" and turn off the power.

Ⅳ. Safety Precautions

1. Before use, please read and follow the instructions carefully.
2. The product should be used together with the power cord and cannot be used with other power cords.
3. The water on the bottom cover of the pot must be wiped dry before use.
4. You should stay with the product while it is working. Do not leave it alone so as to avoid accidents.
5. Do not place the product within the reach of children or mentally retarded people to prevent them from burns.
6. When using, place the product on a flat table. Do not place it near other heat sources or on top of other electrical appliances.
7. When the product is working, do not touch the steam escaping from the glass cover to prevent yourself burns.
8. Do not add water higher than the maximum level to avoid boiling water splashing out and scalding people; nor below the minimum water level to avoid dry burning of the heating plate and damage to the product. The glass lid must be used when the product is boiling water.
9. When using it for the first time, you should add water to the maximum water level, then boil the water and pour it away to clean the pot.
10. Do not let the power cord hang on the table or come into contact with high-temperature objects.
11. It is strictly forbidden to immerse the pot body in water or other liquids to avoid short circuit.
12. Please use a power socket with a voltage consistent with the voltage indicated on the product nameplate.
13. If the power cord is damaged, it must be replaced with a specific cord or a component its manufacturer or maintenance department.
14. Do not turn on the power under the following circumstances: when there is no water in the pot, when adding water, cleaning or moving the product.
15. If any malfunction occurs in the product, please send the product to a specially appointed maintenance office for repair before next use. Users must not repair by themselves. To avoid electrical hazards, please do not remove the bottom cover of the kettle or the power cord by yourself.
16. This product is limited to home or similar places.