Shopping Cart
/

FAUCET WATER FILTER JSQH004 USER MANUAL

SPECIFICATIONS

Name

Filter material

Flow rate

Working pressure

Working temperature

Faucet water filter

Ceramic diatom compounds

1.0-2.0L/minutes

0.1~0.4MPa

5-38°C

 

ILLUSTRATION

①Main Housing ②Purified Water Outlet ③Tap Connector Parts ④Faucet Connector Switch Button ⑤Purified Water Switch ⑥Raw Water Outlet

①22 inner thread connector ②24 inner thread connector ③22 outer thread connector ④24 outer thread connector ⑤multifunctional connector ⑥22 waterproof pad ⑦24 waterproof pad ⑧wrench

 

ASSEMBLY

1, Installation method of threadless faucet

Please prepare a slotted screwdriver for installation. Use the slotted screwdriver to loosen the

multifunctional connector, and then insert it on the water outlet of the threadless faucet. Tighten the ring of the multifunctional connector with the screwdriver, then place the waterproof pad on a suitable inner thread connector and connect to the multi-function connector.

Insert the faucet filtration system into the faucet connector, and then turn on the faucet to see if it works normally and check for water leakage in each parts. If there is no water leakage, the installation is complete.

  1. Installation method of internal faucet

Note: Waterproof pads must be placed in the internal faucet, otherwise there will be water leakage at the connection point.

①22 outer thread connector ②24 outer thread connector ③22 waterproof pad ④24 waterproof pad

Unscrew the bubbler on the faucet, and put the waterproof pad into the outlet of the internal faucet, then connect the appropriate external connector to the outlet of the internal faucet, and tighten it.

Insert the faucet filtration system into the faucet connector, and then turn on the faucet to see if it works normally and check for water leakage in each parts. If there is no water leakage, the installation is complete.

  1. Installation method of external faucet

Note: Waterproof pads must be placed in the internal faucet, otherwise there will be water leakage at the connection point.

①waterproof pad ②22 inner thread connector ③24 inner thread connector

Unscrew the bubbler on the faucet, and put the waterproof pad on the appropriate inner thread connector, then connect to the outlet of the external faucet, and tighten it.

Insert the faucet filtration system into the faucet connector, and then turn on the faucet to see if it works normally and check for water leakage in each parts. If there is no water leakage, the installation is complete.

 

MAINTENANCE

Make sure the product functions properly, and replace the filter cartridge when any of the following situations occur:

  • The output of purified water is significantly reduced.
  • The purified water has asmell or is still
  • The cartridge has been used for more than a certain period of time.
  • Recommended replacement cycle: 6 months

 

CAUTION

  1. Please do not block the water outlet of the productor connect it with other devices to avoid damage.
  2. Children canuse the product only under adult supervision to avoid accidental injury.
  3. If you encounter any problems during use or installation, please feel free to contact our customer service.