Ⅰ. Product Parameters
|
Product Name |
Model NO. |
Rated Voltage |
Rated Frequency |
Rated Frequency |
|
HAIR CURLER |
JFBA010 |
220V- |
50Hz |
59w |
Ⅱ. Product Display
- Heat insulation head
- Heat insulation shell
- Heater
- Curling iron
- Curling iron locator
- Left rotation button
- Right rotation button
- Temperature indicator light
- Power/Temperature adjustment button
Ⅲ. Instructions
- Insert the plug into a wall socket.
- Press the power button of the machine to turn it on, and switch to a suitable temperature for your hair type. Preheat for 1 to 3 minutes before starting operation.
- Grab a small piece of hair and place it between the curling iron and its locator.
- Press and hold the left or right rotation button, wait for the hair to be completely wrapped, and stay for a few seconds.
- Release the rotation button and slowly pull out the curling iron
- Completed
- Styling advice:
- Our product works better on washed hair.
- After shampooing, use a hair dryer to dry your hair properly to make it smooth and tangle-free.
- Fine and soft hair : 160°C
- Normal hair types : 180°C
- Coarse and hard hair : 200'C
Ⅳ. Cleaning and Maintaining
- Make sure the product is turned off and unplugged.
- Set it aside until cooled It is highly recommended that you place it on an insulated surface
- Wipe the product with a slightly damp clean cloth
- Never twine the power cord around the product
- Please keep the product and power cord in a safe, dry place which is out of the reach of children. You can also use the hanging loop to hang the product for storage
Ⅴ. Safety Precautions
- Do not use this appliance near a bath, shower, wash basin, or other vessel filled with water
- Do not use this appliance near bathtubs, showers, washbasins or other vessels filled with water.
- If the supply cord is damaged, it must be replaced by maintenance department or qualified personnel i to avoid accidents.
- When using the product, the heating rod body will become very hot
- Keep this product out of reach of children
- Do not let the power cord touch the heating part of the product
- When using the product, the heating rod body will become very hot
- If the product is on, keep flammable objects and materials away from the product.
- Never leave a plugged in product alone.
- Before connecting the power supply, please check whether the voltage of the product is consistent with the local power supply voltage.
- Check the condition of the power cord regularly; do not use the product if the plug, cord, or product itself is damaged
- Never twine the power cord around the product
- Always unplug the product after use
- Store the product after it has cooled completely
- Keep the wand clean, free of dust and dirt, and never use the product with styling mousse, styling spray and hairspray
- The product body and plate surface are coated with ceramic coating, which will wear out over time without affecting the normal function of the product.
- Even if the coating wears off, it will not affect the normal function of the product.
- When the product is used on color-treated hair, the plate may become colored.