Cart
Home
/
SG/MY-HAIR DRYER CFJH010 USER MANUAL

SG/MY-HAIR DRYER CFJH010 USER MANUAL

SPECIFICATION

Product Name

Model No.

Rated Voltage

Rated Power

Rated Frequency

HAIR DRYER

C-931

220-240V~

1600W

50-60Hz

 

ILLUSTRATION

  1. Wind speed indicator light
  2. Wind speed switch button
  3. Cold air button
  4. Temperature indicator light
  5. Temperature switch button
  6. Power on/off button
  7. Air inlet
  8. Removable filter
  9. Power cord

 

 

OPERATION

  1. 3-gear wind speed setting: Gear 1: gentle; Gear 2: medium; Gear 3: fast
  2. 3-gear temperature setting: Gear 1: 60 ℃; Gear 2: 80℃; Gear 3: 100℃
  3. Power switch: Slide switch
  4. Long press to switch to cold air (to set hair after styling)

 

Reverse Rotation for Cleaning

  1. Power on/off button
  2. Cold air button

Operation:

  1. Long press the cold air button
  2. Slide the power switch upward, wait for 3-5 seconds to activate the reverse cleaning mode. The device will clean for 8 seconds and then stop automatically.

Note: After the cleaning mode stops automatically, you can switch the power switch back to the off state. If you do not switch it back, the machine will automatically restart after 3-5 seconds and return to its normal operating state.

The air outlet and metal ring may become hot during use; please allow them to cool before touching.

 

CLEANING AND MAINTENANCE

Filter Cleaning and Maintenance

The stainless steel filter at the air inlet may become covered with dust; please clean it at least once a month.

  1. Rotate the outer grille counterclockwise to remove it.

  1. Use paper towels, a cloth, or a bristle brush to clean the dust and debris from the stainless steel filter.

  1. Reinstall the stainless steel filter and the outer grille, and rotate the outer grille clockwise to secure it in place.

 

 

CAUTION

Attachments on the nozzle are magnetic:

  1. Keep away from pacemakers, defibrillators, credit cards, and electronic storage media to reduce the risk of fire, electric shock, and injury.
  2. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  3. Children should be supervised not to play with the appliance.
  4. If this product is used in a bathroom, unplug it after use. Even when the product is turned off, proximity to water can be dangerous.
  5. Warning: Do not use this product near bathtubs, showers, basins, or other containers with water.
  6. If the flexible power cord is damaged, it must be replaced by the manufacturer, their service agent, or a similar qualified person to avoid danger.
  7. This product is equipped with a non-resettable thermal safety cut-off device to prevent overheating. If the product cuts off power, unplug it from the main power socket and allow it to cool.
  8. Note: To avoid the risk caused by accidental resetting of the thermal cut-off, this product must not be connected to external switching devices like timers, nor should it be connected to circuits that are periodically switched on and off by utility companies, nor plugged into sockets where the power supply might be unstable or subject to disconnection.
  9. For additional protection, it is recommended to install a residual current device (RCD) with a rated residual operating current not exceeding 3 mA. Seek advice from the installer.
  10. Do not use this product for any purpose other than drying hair.
  11. Do not touch the plug or any part of the product with wet hands.
  12. When disconnecting the plug, do not pull on the cable. To unplug, grasp the plug rather than the cable. It is recommended not to use extension cords.
  13. Do not pull or weigh down the power cord. Keep the power cord away from heated surfaces, and do not wrap the cord around the product.
  14. Do not use any lubricants, cleaning agents, polishes, or air fresheners on any parts of this product.
  15. For maintenance or repairs, contact customer service. Do not dismantle the product; improper dismantling could cause electric shock or fire.
  16. If the product does not operate according to its design, has been subjected to severe impact, dropped from a height, or damaged and placed outside or fallen into water, do not use it and contact customer service.