Shopping Cart
/

Horizontal vacuum cleaner XCQH015 USER MANUAL

SPECIFICATIONS

Product name

Rated voltage

Rated power

Rated frequency

Horizontal vacuum cleaner

220V~

1200W

50~60Hz

 

ILLUSTRATION

  1. Air volume control slide button
  2. Elbow
  3. Metal extension tube release button
  4. Metal extension tube
  5. Carpet/floor switching button
  6. Brush
  7. Hose
  8. Dust bag release button
  9. Handle
  10. Dust bag
  11. Main suction pipe
  12. Winding pedal
  13. Power switch/gear button
  14. Hook slot
  15. Outlet grid release button
  16. Power plug
  17. 2 in 1 brush
  18. Accessory rack
  19. Sofa sucker

 

ASSEMBLY

  1. Hose

  • Insert the bulge of the main suction pipe into the grooves on the left and right sides of the air inlet. Rotate it clockwise by about 45℃ until it is locked.
  • To remove the hose, hold the main pipe and turn it counterclockwise until it cannot be turned. Pull it out then.
  1. Metal extension tube

Connect the larger end of the metal extension tube to the elbow, and then rotate to connect firmly.

  1. Brush

Insert the thin end of the metal extension tube to the elbow, and then rotate to connect firmly.

 

OPERATION

  1. Power on

Notice: When you see a red mark on the power cord, do not pull the power cord outward.

  1. Press the power button

Notice: Please install the dust bag before use.

  1. Adjust suction

Notice: If more holes are exposed, the suction will be less powerful.

  1. Power off: Pressing the winding button, the power cord will automatically be wound into the body.

Notice: Wind the cable slowly to avoid injury to human body or damage to furniture caused by the power cord or plug.

  1. The brush is suitable for
  • Wood floor, ceramic tile, etc.
  • Long wool carpet, short wool carpet, etc.

 

MAINTENANCE

  1. Dust dumping
  • Press the bust bag release button and pull it up, then take it out.
  • Press the release button at the bottom of the dust bag to dump the garbage.

  1. Filter cleaning
  • Turn the filter cone clockwise until you hear a click, and then pull the cone upward.

  • Remove the inlet filter.

  • Remove the outlet filter sponge.

  • Tap the inlet and outlet filters and clean them with water.
  • Dry it thoroughly before re-installing

  1. Notice
  • Before cleaning the machine, please make sure the machine is turned off and unplugged.
  • Do not expose the machine to the humid outdoor environment. Do not clean any accessories using a dishwasher.
  • Clean the shell and HEPA filter of the vacuum cleaner with a wet towel. However, do not make liquid infiltrate into the machine.
  • Do not clean the machine with detergents to prevent the surfaces from corroding.
  • When using, make sure that the body and all accessories are dry and then connect to the power supply.
  • While working, the universal wheels and the wet/dry brush are easily entangled with hair or fluff. Clean it in time to ensure the normal operation of the machine.
  • It is not recommended to use lubricating oil or gasoline to maintain the universal wheels, because it may result in accumulation of dust and hair.

 

CAUTION

  1. The machine is not suitable for persons with physical, sensory or psychological dysfunctions (including children) or persons lacking experience or knowledge unless supervised by guardians responsible for their safety or given prior instructions regarding the use of the machine. Be sure to supervise children to ensure that they do not use it as a toy.
  2. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  3. Please check whether the voltage (volt) of the vacuum cleaner is fully matched with the facilities at your home
  4. Turn off the vacuum cleaner and unplug the power cord in the followingcases:
  • After use each time.
  • Before parts replacement each time.
  • Before each cleaning or maintenance procedure, and before replacement of filter each time.
  1. Do not use the vacuum cleaner if the cable is damaged.
  2. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.