ICE MAKER ZBJH002 USER MANUAL

SPECIFICATIONS

ILLUSTRATION

1. Control Panel:
A. ON/OFF button: start or stop ice making; At the same time can cancel the cleaning and timer setting program; When the unit is making ice cube, press the button for more than 5 seconds, the unit will switch to ice harvest process by force.

B. Time "+" and Clean button:

Ice making time adjustment: when adjusting the ice thickness, press 1 time and the ice making cycle will increase 1 minute.

Timing time adjustment: when setting timing time, press 1 time and the timing time will increase 1 hour.

Automatic cleaning: in standby mode, press the button for more than 5 seconds to enter the automatic program

C. Time "-" and Timer setting button:

Ice making time adjustment: when adjusting the ice thickness, press 1 time and the ice making cycle will reduce 1 minute.

Timer time adjustment: when setting timing time, press 1 time and the timing time will reduce 1 hour.

Timer setting: in standby mode, press the button for more than 5 seconds to set the timing of the machine.

D. Ice cube symbol:when the symbol is rotating,the unit is making ice cube,when the symbol flash,the unit is ice harvest.

E. Ice full warning symbol: the unit will automatically make ice after removing the ice.

F. Digital display:

Ice thickness display: when the number is displayed simultaneously with "D" on the right, means the current ice thickness adjustment gear; For example, the display of "1" and "D" means that the ice making time is increased by 1 minute.

Ice making time countdown display: when the number is displayed simultaneously with "M" on the right,means the ice making time countdown display; For example,the display of "2" and "M" means that the unit will start harvesting ice in about 2 minutes.

Timing display: when the number is displayed simultaneously with " " on the right, means the timing startup or shutdown display.

Automatic cleaning time countdown display: when the number is blinking, there is no unit display on the right side, means the cleaning time countdown; For example, if the display of "20" blinks, it means that the automatic cleaning will end after about 20 minutes.

G. Water shortage symbol: If the symbol is on, the machine is short of water.

H. Ice thickness adjustment unit, display in conjunction with digital display.

I. Ice making time countdown unit, display in conjunction with digital display.

J. Timing setting, display in conjunction with digital display.

2. Ice basket

3. Evaporator

4. Water separator pipe

5. Front up cover

6. Water tank

7. Cover for the water reservoir

8. Water draining cap: To draining out the water from unit

9. Ice scoop

10. Hot Air Outlet

OPERATION

• Add water to ice maker
  Method 1: Manually add water:
  Insert the "water tank" into the corresponding position on the top of the machine, open the "water tank cover", pour drinking water, the water level should be lower than the "MAX" mark line, and then cover the "water tank cover" to prevent foreign matter from entering the water tank. As shown in the picture in the following:

1. Cover of the water tank
2. Water tank

• Ice making operation
  Operation and display areas

1. Ice making startup: Plug in the power plug, the display symbol will start to be steady on, press the "" key on the operation panel, water will be added to the water tank through the electromagnetic water valve. After reaching the standard water level, the unit starts to make ice, and the symbol and" 0 "and" D "are steady on. Steady" 0 D " means that the ice is made atthe default time;
   
   After a few minutes of ice making work, there will be a flashing number and symbol "M", and the flashing number "10M" means that it will take 10 minutes for the ice making to end.

2. After each ice making is finished, the unit will start to harvest the ice cube, and the ice making symbol will be shining. Water will be added to the tank through the electromagneticwater valve until it reaches the standard water level of the tank, and the unit will enter the nextice making cycle; when the water added to the tank cannot reach the standard water level of the tank, the symbol will be steady on, and the unit will stop working. After a water shortage, it is necessary to restart the machine, otherwise it will wait for about 15 minutes and automatically start up.
   
   Note: Each ice-making cycle is about 10-25 minutes, and the ice-making time may vary according to the ambient temperature and the water temperature added. Especially the first time to make ice, due to the higher water temperature in the tank, the ice making time will be longer. But the ice-making cycle will not exceed 35 minutes.

3. Adjustment of ice thickness: if you think the ice cube is not thick enough, during ice making, press the“+”and“-”to set the ice-making time; when the number and symbol "D" are displayed on the display screen, it means setting ice-making time, the default is "0", press the "+" key once to increase the ice-making time by one minute, and the ice cube will be thicker. The ice-making time can be increased by up to 6 minutes, and the display will display the corresponding number; Press the "-" key once to reduce the ice-making time by one minute, and the ice cube will be thinner. The ice making time can be reduced by up to 6 minutes. After the unit is powered on again, it returns to the default setting of "0". After the ice making time is set, it can only start from the new cycle.
4. When ice full symbol is on, the unit will stop. Take out the ice cube inside and the unit will start working again .
5. Ice making shutdown: Press the "On/Off" button on the operation panel to shut down the unit and enter the standby mode when the unit is working.

• Forced ice harvesting operation
  If press the "On/Off" button more than 5S, when the ice maker is working, the unit will start harvest. Press "On/Off" button, the unit will turn off.

• Automatic self-cleaning program
  The default cleaning time of automatic self-cleaning program is 20 minutes. Plug in the unit with the water tank filled with water, press the "+" button on the operation panel for more than 5 seconds to start entering the self-cleaning function, and the number "20" on the display flashes, indicating the end of the self-cleaning function after 20 minutes.
  
  Cancel the self-cleaning program: It takes about 20 minutes to complete a self-cleaning program. When the program is finished, the system will automatically be in the off state; You can also force a stop to the self-cleaning program by pressing the "On/off" button on the operation panel.

• Timed startup and shutdown function operation
  1. Timer setting:
  Timer setting range: 1-24 hours
  Timed shutdown: When the unit is working, timed shutdown can be set.
  Timed startup: When the unit is in standby, timed startup can be set.
  
  2. How to set the timer
  Press the "-" button on the operation panel for more than 5 seconds, and the timing time "1" and symbol " " appear on the display screen. Then press the" + "button to adjust the timing time you need. Each time you press, the time increases by 1 hour; Press "-" to reduce the timing time. The symbol " " is shining during the time adjustment process, and the setting will be completed when the symbol is steady on after 5 seconds.
  Timed startup display: "5" and " " are displayed in the standby state, indicating that the unit will automatically start up after 5 hours;
  Timed shutdown display: in the ice making condition, the symbol " " is on, indicating that there is a timed shutdown setting at present. Pressing the" - "button for more than 5 seconds, you can display the current setting time. " 5 "and"" are displayed, indicating that the machine will automatically shut down after 5 hours.
  
  3. How to cancel the timing
  When the unit has been timed, press the "-" button on the operation panel for more than 5 seconds, and the number and " " on the screen blink. Then press the" - "button on the operation panel for more than 5 seconds, the timing will be canceled; You can also set the timing time to "0", and the timing will be canceled after 5 seconds.
  You can also directly press the " " key on the operation panel to force off the timing function and directly turn it on or off.
  
  4. Ice maker drainage: pull out the drain plug at the bottom of the ice maker to empty the water in the inner tank; The ice maker must be in standby mode to drain water from the water tank and inner tank. Then reset the drain plug when the drain is complete.
  In order to ensure hygiene requirements, please change the water every 24 hours and clean the inner tank and water tank every three days.

• Warning
  1. Make sure the water tank, water filter and the water separator pipe is not blocked, clean them periodically.
  2. The water temp will effect the ice making capacity.The lower temp is, the more ice cube can be produced.
  3. The cooler ambient temp is, the more ice cube can be produced.
  4. Always use good quality water to make sure the pump work well. Bad quality water will cause pump noise, but doesn't effect the unit working.
  5. The compressor will restart 3mins later if you turn off the unit.

CLEANING AND MAINTENANCE

Before using your ice maker, it is strongly recommended to clean it thoroughly.

1. Take out the ice basket.
2. Clean the interior with diluted detergent, warm water and a soft cloth.
3. Then use the water to rinse the inside parts, and drain out the water from the draining port by unplugging the water drainage cap on the bottom.
4. The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm water.
5. Dry the interior and exterior with a soft cloth.
6. When the machine is not in use for a long time, open the water drainage cap to drain water completely out from the water tank.

After using your ice maker for a long time, we also suggest you should clean your unit. Especially for the water separator pipe and the wate filters, you must clean them periodically.

1. If the water separator pipe is blocked and there is no water flowing down when you listen the compressor and the water pump inside are still working. Clean the each hole on the pipe wall displayed in following picture.

1. Water Separator Pipe
2. Hole
3. Evaporator

2. For both of the water tank and the big water reservoir, clean them with diluted detergent, warm water and a soft cloth. Then use the water to rinse the inside, and drain out the water from the draining port by unplugging the water drainage cap at the bottom. It will help you keep the unit and ice-cube clean, and also make the unit work normally.
3. When cleaning, if find that the ice cube left on the evaporator and can not be taken out easily, you can turn on the unit to let the unit enter the ice making process, then press “ON/OFF” buttonfor more than 5 seconds to let the unit start ice harvest process to melt the ice cube.It will help you remove the hard ice cube.

How to drain out the water from the internal tank and big water reservoir completely

Because the water in the big water reservoir is stop to drain port by the water valave, if you want to drain away all the water, please plug on the unit and but don’t start the unit, then remove the water drainage cap at the bottom. Wait some minutes, all of the water will flow out.

CAUTION

• Do not operate this, or any other appliance with a damaged cord.
• Connect to properly polarized outlets only. No other appliance should be plugged into the same outlet. Be sure that the plug is fully inserted into the receptacle.
• Do not run the power cord over carpeting or other heat insulators. Do not cover the cord. Keep cord away from traffic areas, and do not submerge in water.
• We do not recommend the use of an extension cord, as it may overheat and become a risk of fire. If you must use an extension cord, use No.14 AWG minimum size and rated no less than 1875 watts.
• Unplug the ice maker before cleaning or making any repairs or servicing.
• Exercise caution and use reasonable supervision when appliance is used near children.
• Do not use your ice-maker outdoors. Place the ice-maker away from direct sunlight and make sure that there is at least 6 inches of space between the back of your unit and wall. Keep a minimum distance of 6 inches on each side of your unit free.
• Do not use other liquid to make the ice-cube other than water.
• Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or explosion.
• Do not tip over.
• If the ice maker is brought in from outside in wintertime, give it a few hours to warm up to room temperature before plugging it in.
  WARNING: This appliance must be earthed.

• If the unit is with problem need to be maintained, that replacing with like components andthat servicing shall be done by factory authorized service personnel, so as to minimize the risk of possible ignition due to incorrect parts or improper service.
  IMPORTANT:
  The wires in this mains lead are colored in accordance with the following code:
  -Green or Green with a strip yellow: Grounding
  -White: Neutral
  -Black: Live

• To avoid a hazard due to instability of the appliance, it must be placed at a even or flat surface.

• Note:

  Please use drinking water or purified water for ice making. Do not use tap water. If tap water or any unknown liquids are used and cause the machine to rust or malfunction, warranty service will not be provided.