PH-STAND FAN XHSH002 User Manual

Video - Air Circulation Fan

Ⅰ. Product Parameters

Ⅱ. Product Display

1. Front cover
2. Aromatherapy cover
3. Button
4. Knob
5. Steel Pipe
6. Base
7. Rear mesh cover
8. Lower host
9. Screws

Ⅲ. Instructions

• Host Installation 

    Open the packing box and take out all accessories

1. Pull out the steel pipe to the required height and tighten it. Tighten the screws and use a screwdriver to remove the screw at the bottom of the steel pipe.
2. Insert the steel pipe into the steel pipe hole of the chassis
3. Use a screwdriver to tighten the bottom screw that was removed earlier
4. Rotate the upper and lower column tubes counterclockwise and tighten them

• Installation:

1. Turn counterclockwise to remove the aromatherapy cover.
2. Drop the essence on the aromatherapy cotton
3. Turn clockwise to install the coriander cap.

• Control panel

1. Up-to-down oscillation
2. Left-to-right oscillation-High
3. Left-to-right oscillation-Medium
4. Left-to-right oscillation-Low
5. OFF
6. Low
7. Medium
8. High

• Instructions

1. After taking out and assembling the fan and accessories, plug in the appropriate power supply;
2. Turn the knob to the desired wind speed;
3. Up-to-down oscillation: Press this button after the fan is started to turn on the up-to-down oscillation; press this button again to turn off.

Ⅳ. Cleaning and Maintaining

1. When the product is not in use, please turn off the switch and cut off the power supply.
2. Make sure the fan is disconnected from the power supply before removing the protective casing.
3. When cleaning, use a soft rag dipped in a small amount of water or kitchen detergent to gently wipe the surface of the product.
4. It is strictly forbidden to use solvents such as alcohol, gasoline, banana water or toluene for cleaning to prevent the product shell from turning yellow or being corroded.
5. After wiping the product clean, dry and store it in the original packaging.
6. This appliance should be stored in a well-ventilated warehouse with a temperature below 40°C, and there should be no corrosive gases around it.

Ⅴ. Safety Precautions

1. This product is suitable for home use, please do not use it outdoors.
2. Do not use it in environments that can produce corrosive or explosive gases (such as dust, steam or gas).
3. Please do not use this product in environments with high temperature， humidity, a large amount of dust, oil smoke and other particulate matter.
4. This product cannot be used by people with weak physical ability, slow reaction, or mental disorders, unless they are under the guidance or help of the person responsible for their safety; unattended young children and disabled people are prohibited from using this product. Children are prohibited from playing with this product
5. Please use a power supply consistent with the nameplate parameters of the machine, and use a separate socket that complies with national standards to ensure safety.
6. This product must be placed on a horizontal surface for use. Do not place the product at an angle or upside down.
7. Do not turn on the power supply until assembly is complete.
8. Before use, check whether the power cord and plug are damaged. Do not bend or pull the power cord to avoid damage.
9. Keep away from fire sources and combustibles when using
10. This product is not allowed to be used around bathtubs, jets and swimming pools
11. Please turn off all buttons and unplug the power plug when the product is in a power outage, unattended or not in use for a long time.
12. Do not place or hang objects on the top of this product to avoid danger.
13. It is strictly prohibited to insert any foreign objects into the appliance, to place clothes or other items that may be sucked in around the fan to avoid mechanical damage, electric shock or fire.
14. Please do not pull the ejector mechanism of the product forcefully to avoid damaging the internal structure.
15. Do not touch switches and other controls with wet hands
16. It is prohibited to rinse this appliance with water
17. When cleaning, maintaining and moving the product, the power supply must be disconnected
18. During cleaning and maintenance, if the protective casing needs to be removed, the fan must be disconnected from the power supply before removing the protective casing.
19. If the supply cord is damaged, it must be replaced by maintenance department or qualified personnel i to avoid accidents.
20. It is normal for there to be a slight odor during the first period of power-on. If odor, smoke, etc. occur during long-term use, the appliance should be turned off, unplugged from the power plug, and sent to the maintenance department for repair.