Cart
/

PH-DEHUMIDIFIER CUSH005 User Manual

Video - Dehumidifier

Ⅰ. Product Parameters

Product Name

Model NO

Rated Voltage

Rated Frequency

Rated Power

Appliance classes

DEHUMIDIFIER

T9PLUS

220 V-240 V~

50 Hz/60 Hz

40w

Class II

Ⅱ. Product Display

  1. Power button
  2. Indicator light
  3. Air inlet
  4. Water tank lid
  5. Water tank
  6. Air outlet
  7. Filter cover
  8. Power cord
  9. Dehumidifier float
  10. Tank window

Ⅲ. Instructions

  • Water full automatic shutoff function:

When the dehumidifier detects that the water is full, the yellow indicator light of  will always be on. The dehumidifier stops running and won’t start working until you pour water and reset.

  • Basic operating steps:
  1. Take out the dehumidifier from the box, and connect the power cord plug  to the power socket;
  2. Press the power button to turn it on, and the green indicator light is always on;
  3. Press the power button again to shut down, and the indicator light goes out.
  • Pouring water steps:
  1. The dehumidification capacity is about 650ml a day, and the maximum of the water tank is 1.5L.
  2. When the water tank is full, the indicator light is always yellow and the product will stop automatically. At this time, please press the power button to shut down, and then slowly take out the water tank.
  3. Open and take out the water tank lid, then pour out the water.
  4. After pouring out the water, push the water tank lid toward the water tank window, and fasten the water tank lid.
  5. Put the water tank back to its original position, press the power button to turn on the product.
  • Replace the filter
  1. Pull the handle of the filter cover in the direction of the arrow, and pull out the filter lid.
  2. Pull out the filter in the direction of the arrow.
  3. Insert the new filter  in the direction of the arrow.
  4. Buckle the filter cover vertically in the direction of the arrow.

Ⅳ. Cleaning and Maintaining

  • Notes:
  1. Ensure the product is off and unplugged before maintenance.
  2. Do not immerse the machine body in water or any liquid.
  3. Do not use abrasive, corrosive, or flammable cleansers (such as bleach or alcohol) to clean any part of the unit.
  4. Remove the filter bag before use.
  • Cleaning steps:
  1. Shut down and unplug the power plug;
  2. Clean the air inlet/outlet, and wipe the shell of the product with a neutral detergent and a soft cotton cloth;
  3. Take out the water tank, open the water tank cover, and rinse the water tank cover/water tank with clean water.
  • Storage:
  1. Shut down and unplug the power plug,  sort and bundle the power cord.
  2. Clean the air inlet/outlet, and wipe the shell of the product with a neutral detergent and a soft cotton cloth;
  3. After the body is completely dry, put on the dust cover/bag. Please place the purifier in a well-ventilated place out of direct sunlight.
  4. To ensure a good performance of the product, please turn on the product for a few minutes from time to time if it isn’t in use for a long time.

Ⅴ. Safety Precautions

  1. To avoid electric shock and fire, do not allow water, liquid, or any flammable detergent to get into or to clean the product.
  2. Do not spray any flammable material such as pesticides or perfumes around the product.
  3. Before connecting the power supply, please check whether the voltage of the product is consistent with the local power supply voltage.
  4. If the power cord is damaged, in order to avoid danger, it must be replaced by professional staff.
  5. Please stop using it if the plug, power cord, or product is damaged.
  6. Do not block the air inlet and outlet, and do not place anything on the air outlet or in front of the air inlet.
  7. Do not insert things into the machine.
  8. This product is not recommended to be used by people (including children) who have physical, sensory or mental impairments, or lack relevant experience and common sense, unless they are used under the supervision and guidance of guardians. Children are forbidden to play with the product. Do not allow children to clean and maintain the product without supervision.
  9. Do not block the air inlet and outlet, and do not place anything on the air outlet or in front of the air inlet. Leave at least 30cm of space  for the inlet of the product, and 50cm for the outlet.
  10. Make sure the connected power socket is in good contact. If not, the plug will be hot.
  11. Be sure to place and use the product on a firm, flat and horizontal surface.
  12. Do not place the product under an air conditioner to prevent condensation water from dropping into the product.
  13. Do not insert a finger or other things into the air outlet/inlet to prevent physical damage or trouble.
  14. Ensure the product is unplugged before moving, cleaning, and maintaining.
  15. Unplug the power connection before moving the product. Do not pull the wire to move the product.