PH-HAIR CURLER JFBA010 User Manual English Version

Ⅰ. Product Parameters

Ⅱ. Product Display

1. Heat insulation head
2. Heat insulation shell
3. Heater
4. Curling iron
5. Curling iron locator
6. Left rotation button
7. Right rotation button
8. Temperature indicator light
9. Power/Temperature adjustment button

Ⅲ. Instructions

1. Insert the plug into a wall socket.
2. Press the power button of the machine to turn it on, and switch to a suitable temperature  for your hair type. Preheat for 1 to 3 minutes before starting operation.
3. Grab a small piece of hair and place it between the curling iron and its locator.
4. Press and hold the left or right rotation button, wait for the hair to be completely wrapped, and stay for a few seconds.
5. Release the rotation button and slowly pull out the curling iron
6. Completed

• Styling advice:

1. Our product works better on washed hair.
2. After shampooing, use a hair dryer to dry your hair properly to make it smooth and tangle-free.
3. Fine and soft hair : 160°C
4. Normal hair types : 180°C
5. Coarse and hard hair : 200'C

Ⅳ. Cleaning and Maintaining

1. Make sure the product is turned off and unplugged.
2. Set it aside until cooled It is highly recommended that you place it on an insulated surface
3. Wipe the product with a slightly damp clean cloth
4. Never twine the power cord around the product
5. Please keep the product and power cord in a safe, dry place which is out of the reach of children. You can also use the hanging loop to hang the product for storage

Ⅴ. Safety Precautions

1. Do not use this appliance near a bath, shower, wash basin, or other vessel filled with water
2. Do not use this appliance near bathtubs, showers, washbasins or other vessels filled with water.
3. If the supply cord is damaged, it must be replaced by maintenance department or qualified personnel i to avoid accidents.
4. When using the product, the heating rod body will become very hot
5. Keep this product out of reach of children
6. Do not let the power cord touch the heating part of the product
7. When using the product, the heating rod body will become very hot
8. If the product is on, keep flammable objects and materials away from the product.
9. Never leave a  plugged in product alone.
10. Before connecting the power supply, please check whether the voltage of the product is consistent with the local power supply voltage.
11. Check the condition of the power cord regularly; do not use the product if the plug, cord, or product itself is damaged
12. Never twine the power cord around the product
13. Always unplug the product after use
14. Store the product after it has cooled completely
15. Keep the wand clean, free of dust and dirt, and never use the product with styling mousse, styling spray and hairspray
16. The product body and plate surface are coated with ceramic coating, which will wear out over time without affecting the normal function of the product.
17. Even if the coating wears off, it will not affect the normal function of the product.
18. When the product is used on color-treated hair, the plate may become colored.