Cart
/

PH-HAIR DRYER BRUSH RFSH003 USER MANUAL

SPECIFICATIONS

Product name

Model No.

Rated voltage

Rated frequency

Rated power

Appliance classes

HAIR DRYER BRUSH

BY-818

220-240V~

50-60Hz

1500W

Class Ⅱ

 

ILLUSTRATION

 

OPERATION

  1. Always make sure the switch is off before plugging the appliance into an electrical outlet.
  2. Use the highspeed for blow-drying hair and the low speed for styling.
  3. If the appliance stops running for any reason, turn it off immediately and allow it to cool down.
  4. Button operation
    0 = Power off

    1 = Power on
    SET = Switch mode
    Green light = cold air and high speed
    Yellow light = hot air and low speed
    Red light = hot air and high speed

After shutting down cold air mode and turning off the appliance, long press the SET button for 5-7 seconds to start the self-cleaning mode.

 

MAINTENANCE

  1. When not using the product, please remove the brush and other accessories.
  2. Keep the air inlet netclean by removing hair and dust frequently. Clean the air inlet and outlet to prevent clogging that could lead to overheating.
  3. To clean the air intake, remove dust or hair by turning the filter counterclockwise and pulling it out toward you.
  4. When reinstalling the filter, make sure the connector's grooves line up with the filter's protrusions. Twist to install.
  5. Keep the appliance
  6. Theappliance should be cleaned at least once a month.

 

CAUTION

  1. After use, be sure to set the power button to the “0” position before unplugging from the outlet. Unplug theappliance when not in use. Be sure to grasp the plug instead of the cord when unplugging. Failure to do so may result in fire or accident.
  2. Before connectingto power, check that the voltage of the appliance matches the voltage in your home.
  3. Do not cut, damage or modify the cord. Do not pull, twist or bend the cord with force. Do not place heavy objects on the cord or allow the cord to get caught between objects. Do not wrap the cord around the applianceas this may cause fire or electric shock. If the cord becomes damaged or hot, stop using it immediately.
  4. When using the appliancein the bathroom, unplug it from the power supply after use because it can be dangerous near water even when switched off, .
  5. This appliance is not suitable for persons (including children) with poor physical, sensory or mental ability or lack of experience and knowledge unless they are supervised or instructed in the use of the appliance by a person responsible for their safety.
  6. Children should be supervised to ensure that they do not play with the appliance.
  7. If the appliancedoes not produce air consistently, or the cord or plug is damaged or hot, or the plug is loose, stop using it immediately.
  8. Never insert foreign objects into the air inlet or outlet.
  9. Do not use the appliancenear flammable materials, such as benzene, paint thinner, sprays, etc.
  10. Do not use the appliancewith wet hands.
  11. Do not use or leave the appliancein areas of high humidity. Do not immerse the appliance in water.
  12. Do not attempt to repair, disassemble or modify the appliance
  13. If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person to avoid danger.
  14. If the power cord or plug is damaged, stop using it immediately and contact an authorized service center.
  15. Do not put your hands on the air vents or use the air vents if they are damaged. You may be burned.
  16. Do not touch the attachments as they will become hot during and after use.
  17. Make sure that your hair is not sucked into the air inlet.
  18. This applianceis equipped with an automatic overheating protection device.  
  19. In case of overheating, cold air will be generated. Unplug it from the electrical outlet. Let it cool down for a few minutes before using it again. Before turning on again, check that there is no lint, hair, etc. in the air inlet and outlet.