Cart
/

PH-HAIR DRYER CFJH010 USER MANUAL

SPECIFICATION

Product Name

Model No.

Rated Frequency

Rated Voltage

Rated Power

Appliance Classes

HAIR DRYER

RENZ0189

50-60Hz

220-240V

1600W

Class Ⅱ

 

ILLUSTRATION

  1. Wind speed indicator light
  2. Wind speed switch button
  3. Cold air button
  4. Temperature indicator light
  5. Temperature switch button
  6. Power on/off button
  7. Air inlet
  8. Removable filter
  9. Power cord

 

 

OPERATION

  1. 3-gear wind speed setting: Gear 1: gentle; Gear 2: medium; Gear 3: fast
  2. 3-gear temperature setting: Gear 1: 60 ℃; Gear 2: 80℃; Gear 3: 100℃
  3. Power switch: Slide switch
  4. Long press to switch to cold air (to set hair after styling)

 

Reverse Rotation for Cleaning

  1. Power on/off button
  2. Cold air button

Operation:

  1. Long press the cold air button
  2. Slide the power switch upward, wait for 3-5 seconds to activate the reverse cleaning mode. The device will clean for 8 seconds and then stop automatically.

Note: After the cleaning mode stops automatically, you can switch the power switch back to the off state. If you do not switch it back, the machine will automatically restart after 3-5 seconds and return to its normal operating state.

The air outlet and metal ring may become hot during use; please allow them to cool before touching.

 

CLEANING AND MAINTENANCE

Filter Cleaning and Maintenance

The stainless steel filter at the air inlet may become covered with dust; please clean it at least once a month.

  1. Rotate the outer grille counterclockwise to remove it.

  1. Use paper towels, a cloth, or a bristle brush to clean the dust and debris from the stainless steel filter.

  1. Reinstall the stainless steel filter and the outer grille, and rotate the outer grille clockwise to secure it in place.

 

 

CAUTION

Attachments on the nozzle are magnetic:

  1. Keep away from pacemakers, defibrillators, credit cards, and electronic storage media to reduce the risk of fire, electric shock, and injury.
  2. This product must not be used by persons (including children) whose physical, sensory, or mental capabilities are limited or who lack experience and knowledge, unless they have been given supervision or instruction concerning use so that they can use the product safely.
  3. Do not use this product as a toy. Special attention is required when it is used by or near children. Please supervise children to ensure they do not play with this product as a toy.
  4. If this product is used in a bathroom, unplug it after use. Even when the product is turned off, proximity to water can be dangerous.
  5. Warning: Do not use this product near bathtubs, showers, basins, or other containers with water.
  6. If the flexible power cord is damaged, it must be replaced by the manufacturer, their service agent, or a similar qualified person to avoid danger.
  7. This product is equipped with a non-resettable thermal safety cut-off device to prevent overheating. If the product cuts off power, unplug it from the main power socket and allow it to cool.
  8. Note: To avoid the risk caused by accidental resetting of the thermal cut-off, this product must not be connected to external switching devices like timers, nor should it be connected to circuits that are periodically switched on and off by utility companies, nor plugged into sockets where the power supply might be unstable or subject to disconnection.
  9. For additional protection, it is recommended to install a residual current device (RCD) with a rated residual operating current not exceeding 3 mA. Seek advice from the installer.
  10. Do not use this product for any purpose other than drying hair.
  11. Do not touch the plug or any part of the product with wet hands.
  12. When disconnecting the plug, do not pull on the cable. To unplug, grasp the plug rather than the cable. It is recommended not to use extension cords.
  13. Do not pull or weigh down the power cord. Keep the power cord away from heated surfaces, and do not wrap the cord around the product.
  14. Do not use any lubricants, cleaning agents, polishes, or air fresheners on any parts of this product.
  15. For maintenance or repairs, contact customer service. Do not dismantle the product; improper dismantling could cause electric shock or fire.
  16. If the product does not operate according to its design, has been subjected to severe impact, dropped from a height, or damaged and placed outside or fallen into water, do not use it and contact customer service.

 

TROUBLESHOOTING

If you encounter problems while using the product, please refer to the following tips and solutions:

  1. If the product remains faulty or unusable, please turn off the power.
  2. Users should not disassemble or repair the product by themselves. Any damage caused by self-disassembly or repair will void the product warranty, and the company will not be responsible for any consequences resulting from such actions.

 

Problems

Reasons

Solutions

The product does not work upon turning on.

Red light of temperature is flashing an alarm.

Internal components are overheating.

Restart after a one-minute interval or return to the factory for repair.

Green light of wind speed is flashing an alarm.

Internal components are damaged.

Return to the factory for repair.

The machine does not blow air or heat.

Air inlet or outlet is blocked.

Clean the air inlet or outlet.

Protection program is triggered.

Do not repeatedly turn on and off quickly and continuously.

Inlet voltage is abnormal.

Check the electric grid or voltage.

No light indication.

Power is not connected.

Check if the power cord plug is loose.

The product can work normally upon turning on.

The light circuit board is damaged.

Return to the factory for repair.

Pressing the hot air button has no response.

The button panel is damaged.

Return to the factory for repair.

The heating element is glowing red.

Control panel is damaged.

The power cord or plug is overheating.

The power cord is damaged or the plug is loose.

A burning smell appears during normal use.

Internal components are damaged.