PORTABLE BLENDER ZZJH008 USER MANUAL

SPECIFICATIONS

ILLUSTRATION

① Flip cover

② Main engine

③ Motor bracket

④ Handles rope

⑤ Sealing ring of main engine

⑥ Mixing knife

⑦ Cup sleeve

⑧ Mixing cup

OPERATION

1. Wash the fruit and cut it into 1.5 * 1.5cm small pieces (Note: remove the fruit with core, hard material, thick skin or hard shell first);
2. Put in the fruit, which accounts for 40% of the maximum scale of the cup body, and then fill it with water to the maximum scale of the cup body.Then screw the main engine onto the cup. When the indicator light flashes, it is proved that the main engine has been screwed in place;
   Note: the fruit and water should not exceed the maximum mark on the cup body, so as to avoid spilling water or juice.
3. After double clicking to start the product, turn the product upside down. The default working time of the product is 40 seconds. When the product is working, gently shake the product, and the mixing effect is better. Click once to check the battery state.
4. After juicing, the product will automatically enter the standby state.Open the flip cover and put it to the fixed position to drink, or insert a straw to drink directly;
5. When the product cannot be started and the indicator light flashes red, insert the USB cable into the charging port (applicable to various 5V power supplies); when the product is fully charged, the white indicator light of the product is always on；It can only be charged when the cup screwed into place. It is recommended to assemble the main engine with mixing cup when charging.
6. This product can be charged by using a power bank. A full charge takes approximately 2-4 hours and can produce around 8 cups of freshly squeezed juice.

Using Methods:

1. Add ingredients
   
2. Loading main engine
   
3. Boot host (double click to start)
   
4. Inverted product
   
5. Direct drinking
6. Direct drinking with pipette
7. Insufficient electricity(red light flashing)
8. Full of electricity(white light is always bright)

CLEANING AND MAINTENANCE

CAUTION

1. This product is used to drive DC motor by lithium battery. Please use the USB power cordprovided by our company to fully charge the product before using. The charging time should be 2-4 hours or more. In addition, please clean and dry all parts in contact with the food before use.
2. Only after the product is closed and the mixing knife has stopped completely,the cover can be opened.
3. When cleaning the product, please make sure the switch power is off and thesilica gel at the charging port is plugged. Do not wash the engine in water to prevent water from entering the unit and damaging electronic components.
4. Please do not squeeze the juice for more than 5 times in succession, so as toavoid excessive load of electronic components causing heat and affecting the service life of the product.
5. This product is equipped with overload protection function. lf the knife isjammed due to the large size of the food materials, the product will be shutdown for protection, and the red indicator light will be on for 5 seconds. lt can be restarted after removing the food materials on the knife.
6. All parts of the product shall not be sterilized with hot water or microwaveoven with the temperature of more than 60 ℃ to avoid deformation and damage.
7. Do not put the main parts of the product into the dishwasher or cleaningequipment, and no water can enter into the main engine.
8. Do not use steel velvet, abrasive cleaner or corrosive liquid to clean the
9. This product is a juice machine, not suitable for mincing meat, grinding nutsor bean products.
10. Do not turn the product upside down or start the product when the straw isstill inserted into the main engine or the silica gel plug at the water port is not tightly plugged.
11. lf no one takes care of it, always disconnect the power supply of the mixerbefore assembly, disassembly or cleaning; and do not let children use the mixer without any care.
12. Be careful when removing the mixing knife, cleaning the main machine andmixing cup.
13. Turn off the power switch and disconnect the power before replacingaccessories or contacting moving parts.
14. This product has built-in lithium battery. Please do not put this product inhigh temperature environment and do not discard this product as general garbage.
15. Before discarding the appliance, the battery must be removed from theappliance. Use tools to pry open or destroy the shell, remove the battery and put the batteries in a separate battery waste bin for special people to manage.
16. The appliance must be powered off when removing the battery.
17. The battery should be disposed of safely.
18. This product is for home use only. lf this product is used improperly, usedfor professional or semi-professional purposes or not operated according to the instructions in the user manual, the warranty of this product will be invalid, and the company refuses to take any responsibility for the loss caused thereby.
19. Before using the product for the first time, the product shall be charged to fullpower before use, and the parts contacting with food shall be cleaned  The product is equipped with double safety protection measures and it can only be in standby state after the cup body rotates to the fixed corresponding position of the body.

FAQ: