Portable Blender ZZJH011 User Manual

Ⅰ. Product Specifications

Ⅱ. Product Diagram

1. Cup Lid
2. Lid Sealing Ring
3. Blending Cup
4. Cup Base
5. Blade
6. Blender Base Sealing Ring
7. Main Unit

Ⅲ. Operating Instructions

• First Use

Before using the product for the first time, fully charge it and thoroughly clean all parts that come into contact with food. The product features dual safety protection, and it will only enter standby mode once the cup is securely locked into the corresponding position on the base.

• How to Use

1. Rotate and attach the blending cup to the main unit. The power button will light up white, indicating that it is properly installed.
2. Wash the fruit and cut it into small pieces of approximately 1.5*1.5 cm. (Note:Remove seeds, tough skins, or hard shells from the fruit before placing them in the cup). The total amount of ingredients should fill about 40% of the maximum scale of the cup. Then, add water up to the maximum scale.

Note: Do not exceed the maximum scale line on the cup to prevent spilling of water or juice.

3. Rotate and secure the cup lid onto the blending cup.
4. Double-click the power button to turn on the device.
5. Single-click the start button to start the blending function. The product defaults to a 40-second blending time. Gently shake the product during operation for better blending results.
6. After blending, the product will automatically enter standby mode (after 60 seconds, it will enter sleep mode). Open the flip lid to drink or insert a straw to drink directly.
7. If the product cannot be turned on and the power button flashes red five times, plug the charging cable into the charging port (compatible with any 5V power source). When charging, it is recommended to keep the cup attached to the main unit.
8. When fully charged, the power button will remain lit white.

Note: This product can be charged using various smartphone chargers with the provided charging cable or a power bank. A full charge takes approximately 2-4 hours and can make about 8 cups of freshly squeezed juice.

Ⅳ. Cleaning and Maintenance

1. Before cleaning, ensure the main unit has completely stopped and the power is turned off before disassembling and cleaning.
2. After use, clean the product promptly and dry it completely.
3. The main unit can be wiped with a damp cloth, while the lid and blending cup can be rinsed directly with water.
4. Do not use steel wool, abrasive cleaners, or corrosive liquids to clean the product.
5. The product should not be cleaned in a dishwasher.
6. Before storing the product, ensure it is clean and dry. Store the product in a dry place and avoid direct sunlight.

Ⅴ. Safety precautions

1. This product is powered by a battery-driven DC motor. When charging, use an adapter with an output of 5V 1A (measured output power < 15W) that meets standard requirements. Please use the original power cable provided by the manufacturer to fully charge the product before use. Charging time should be 2-4 hours or more.
2. Before use, please thoroughly clean and dry all parts that come into contact with food.
3. Do not disinfect the accessories with hot water above 60℃ or in a microwave to avoid deformation or damage.
4. This product is designed specifically for fresh juice extraction and should not be used for grinding meat, nuts, or soy products.
5. Do not juice continuously for more than 5 times to prevent excessive heat buildup and damage to the electronic components, which can affect the product's lifespan.
6. This product has an overload protection feature. If the blades get jammed due to large food pieces, the product will stop working, and the red indicator light will stay on for 5 seconds. After removing the jammed food, the product can be restarted.
7. Only twist off the cup lid after the product is turned off and the blade has completely stopped rotating.
8. When cleaning, ensure the power is off and the silicone plug on the charging port is securely in place.
9. Do not submerge the main unit in water or place it in a dishwasher or cleaning equipment to prevent water from damaging the electronic components.
10. Do not use steel wool, abrasive cleaners, or corrosive liquids to clean the main unit and its accessories.
11. Be cautious when removing the blade and cleaning the main unit and blending cup.
12. Always turn off the power and disconnect the power supply before changing accessories or touching moving parts.
13. Keep the blender out of reach of children, especially when unattended.
14. This product contains a built-in lithium battery. Do not expose it to high temperatures, and do not dispose of it with regular waste.
15. Safely dispose of the battery. Before discarding the device, remove the battery using tools to pry open or destroy the casing, take out the battery, and place it in a designated battery waste container for proper disposal by a professional. Ensure the device is powered off before removing the battery.
16. This product is for home use only. Do not misuse it, use it for professional or semi-professional purposes, or operate it in a manner not described in the user manual.

Ⅵ. Troubleshooting