Portable Carpet Cleaner BYJH001 User Manual English Version
Portable Carpet Cleaner BYJH001 User Manual English Version
Ⅰ. Product Parameters
Portable Carpet Cleaner
Ⅱ. Product Display
Clean water tank
Water spray button
Bobbin winder base
To avoid clogging the air ducts, please clean up large pieces of garbage first, such as large pieces of paper, packaging film, etc.
The cleaning scope of this machine is soft surfaces such as fabrics and plush. It is not recommended to be used on hard surfaces.
Before using this product, place the machine on a flat ground
Plug in the power and press the "power". Ⅰ is on and O is off. After the machine is powered on, press the power button again to start working; press again to stop.
The "gear button": It defaults to the standard gear when you power on. Press the button to activate the "powerful mode" and press it again to switch to the "standard mode", back and forth.
The "heating button": Press to activate the "heating button". Select the temperature required according to the prompt interface.
Sewage tank reminder button: When the sewage tank is full, the red light flashes continuously;
Temperature interface of 40℃, temperature interface of 60℃
Press the temperature interface first according to the needs. Hold the cleaning brush in hand while press the "water spray button" at the bottom of the cleaning brush. At this time, the water spray head will continue to spray water outward. Release the button to stop the water spray.
For ordinary stains, you can spray water on the stained area on the fabric after pouring the cleaning solution into the clean water tank. After spraying, use a cleaning brush to wipe it repeatedly and suck the stains and sewage into the sewage tank. Repeat it several times to clean stains quickly; it is recommended to clean again with clean water to prevent cleaning fluid from remaining in the fabric;
For stubborn stains, you should spray the special cleaning fluid on the stained area on the fabric first. After spraying, use a cleaning brush to wipe repeatedly to completely dissolve the stain with the cleaning fluid. Then turn on the machine to suck the cleaning fluid and sewage into the sewage tank. You can quickly clean stains by doing this several times.
This product comes with our company's special foam-free cleaning fluid.
When using this product, you must spray water first and then absorb it. Do not suck up garbage directly. This product is not a vacuum cleaner.
This product has two temperature levels: 40 degrees and 60 degrees. Hot water can quickly dissolve stains and improve cleaning efficiency;
Storage of power cord and hose
Because the power cord of this product is long, after using the product, you can wrap the power cord around the winding base on the back of the machine for easy organization. After use, the hose can be wrapped in the storage slot at the bottom of the machine, which is beautiful and convenient.
The power cord of this product is long, please be careful of not to be tripped during use;
Please do not let children sit on the host;
Please be careful with electrical use, and do not put the power cord into water;
Do not use this machine at temperatures below 0℃ or above 50℃;
It is strictly prohibited to modify the complete machine, accessories and replace wires;
Ⅳ. Cleaning and Maintaining
Sewage tank cleaning:
To maintain product performance, please clean the waste water tank regularly. If there is a lot of sewage in the sewage tank, the suction power of this product will weaken. If the water level reaches the maximum water level, the sewage tank needs to be cleaned in time. After disassembling the sewage tank from the main unit, pour out the sewage and garbage inside and clean the tank.
Disassemble: Pull the sewage tank upwards to disassemble it as a whole. Then you can open the cover of the tank after unlocking the buckle to clean the sewage tank.
Tip: It is recommended to do the above cleaning work after each use of this product.
How to add water into the clean water tank
When the clean water tank is a shortage of water, please add water in time;
How to add water: You need to disassemble the clean water tank first and open the water tank cover to add water inside.
How to disassemble the clean water tank: Pull the clean water tank upwards to disassemble it as a whole, then unscrew the cover of the clean water tank to add water inside.
How to clean the cleaning brushes:
When the cleaning brush is entangled with hair or clogged with dirt, please clean and maintain it in time.
When the cleaning brush is entangled with hair, use a tool to clean the hair or dirt on the bristles.
When the cleaning brush is clogged, please remove the transparent cover above it and use chopsticks or other tools to clean the air duct inside the cleaning brush handle.
How to clean brush head and pipe
Turn on the machine after installing the self-cleaning brush head on the handle. Then keep pressing the water spray button to clean the pipe where you can see some water stored.
You can also directly put the brush head into the faucet for direct cleaning; or directly self-clean the entire pipeline by blocking part of air suction ports with your hand.
Ⅴ. Safety Precautions
Only authorized technical personnel can disassemble this product. It is strictly prohibited to disassemble this product by yourself.
The power cord of this product is long, please do not put it in the water; the power cord can be wrapped around the hook on the back of the host
Do not place this product near cigarette butts, lighters or other open flames
If the product requires cleaning, please clean the product after use.
Do not place heavy objects and sharp objects on the machine
This product is for indoor household use, please do not use it outdoors.
This product is prohibited from being weighed down by objects (people) weighing more than 10Kg.
Before using this product, please remove all fragile items on the floor (such as glasses, lamps) and items that may block the air suction channel (such as wires, pieces of paper, curtains)
Do not place this product in a place where the product is easy to fall (such as on a table or chair)
When the sewage tank is full, please empty it before using.
The operating environment temperatures of this product is 0℃ to 50℃
Do not use this product in high temperature environments
To prevent from tripping, please inform other people in the room when this product is working.