Cart
/

ELECTRIC COFFEE MACHINE KFJH007 User Manual English Version

Video - Semi-Auto Espresso Machine

Ⅰ. Specifications

 Product Name

ELECTRIC COFFEE MACHINE

Model No.

EM3101

Rated Voltage

220-240V~  

Rated Frequency

50/60Hz

Rated Power

1230-1465W

Appliance Classes

Class I

Water tank capacity

1.4L

Pump pressure

20Bar

Ⅱ. Components

  1. Water tank cover   
  2. Water tank   
  3. Steam knob
  4. Body 
  5. Steam nozzle/foam tube   
  6. Base
  7. Power switch
  8. Insulation board 
  9. Top cover
  10. Single-cup coffee switch/indicator light 
  11. Double-cup coffee switch 
  12. Steam preheating switch / Indicator light 
  13. Funnel bracket 
  14. Float
  15. Wastewater plate cover 
  16. Wastewater plate 
  17. Coffee spoon 
  18. Single-cup coffee filter 
  19. Double-cup coffee filter 
  20. Funnel
  21. Coffee outlet
  • Warning: This coffee machine must use ground coffee powder to make coffee, and can only make coffee, coffee drinks (such as cappuccino, lattes, etc.), heated milk, make tea, and other non-standard use may lead to danger.

Ⅲ. Operation manual

  1. "" Power switch: press the primary switch on, the indicator "" ""  "" flashing, the machine starts to warm up, preheating after the 3 lights often on, indicating the machine into the coffee or hot water mode. Press the power switch again during or after the preheating process, and the machine is shut down. If the indicator light "" flashes sharply after starting up, check the steam knob and rotate it clockwise to put it in the off state. (Note: The power switch is in the lower right fuselage)
  2. ""Single-cup coffee switch/indicator light: after preheating, touch the single cup coffee switch to start extracting coffee, indicator "" breath flashing, automatic extraction to the machine stop working or extraction process, touch "" stop working, indicator ""  ""  ""  always on.(Automatic extraction time machine is set, including the coffee infiltration time)
  3. "" Double cup coffee switch/indicator light: After preheating, touch the double cup switch to start extracting coffee, the indicator light "" breath flashes, automatically extract until the machine stops working or touch "" stop working, the indicator light ""  ""  "" always on.(Automatic extraction time machine is set, including the coffee infiltration time)
  4. "" Steam preheat switch/indicator: touch the steam preheating switch, and the indicator "" flashes to start preheating the steam. After the preheating is completed, the indicator is always on and the machine enters the steam production mode. (During the whole process, if you touch and "" again, the machine is switched from steam mode to the extraction coffee mode, and the indicator lights "" and "" flash, which means that the boiler temperature is too high in coffee mode, which requires natural cooling or manual hot water cooling, and the coffee can only be extracted after the indicator lights "", "" and "" are always lit)
  5. Steam knob: The steam knob in the following below is in the closed position. The steam knob is rotated counterclockwise to the maximum position for the open state, when the steam knob is opened in two working states, when the machine is in extraction coffee mode, the steam pipe emits hot water; when the machine is in steam mode, the steam tube emits steam.

  • Reminder: When the power is turned on, the steam preheating indicator light "" keeps flashing quickly, which means that the steam knob is not closed, so rotate the steam knob to the closed position.
  • First use (important):
  1. Unpack and take out the coffee machine, check whether the accessories are complete, and clean all the detachable parts;
  2.  Remove the water tank and remove the red silicone cap from the water outlet of the tank.

  3. To ensure the first coffee, you need to clean the coffee machine and all removable parts. The specific steps are as follows:
  • Fill the tank with water, be careful not to exceed the maximum water level, and then install back to the machine, and cover the tank cover;
  • Hold the upper part of the machine by hand, hold the funnel handle, and turn the high-pressure funnel assembly from position "" counterclockwise to position "", without adding the coffee powder to the high-pressure funnel. (High-pressure funnel must be tightened)

  • Place the coffee cup on a removable water tray and aim at the coffee outlet.
  • Insert the power cord into a grounded socket;
  • Press the power switch, at this time all the indicators are flashing, and the machine begins to warm up, after the indicator becomes always on, preheating is completed;
  • After preheating, open the steam knob counterclockwise to the maximum position, the electromagnetic pump works until the steam pipe has continuous hot water out for at least 30 seconds (this process takes 1-2 minutes), and then turn off the steam switch;
  • Touch the double-cup coffee switch "" and let the hot water flow out to clean the coffee filter and cups.
  • Make espresso (double coffee)
  1. Open the cover of the water tank, take out the water tank, and inject an appropriate amount of water, not exceeding the MAX position of the water tank;
  2. Put the water tank into the original position and cover the water tank;
  3. Plug in the plug, press the power button "", the indicator light ""  ""  "" flashing, and the machine starts to warm up, about 1min, all lights are often on, and preheating is complete;
  4. Remove the high-pressure funnel assembly, add the right amount of coffee powder (16-16.5 grams) to the double-cup coffee filter with a coffee spoon, then press the coffee powder evenly with the bottom of the coffee spoon, and remove the coffee powder at the edge of the filter after compaction.
  5. Note: If too much coffee powder remains on the edge of the filter, it is easy to cause poor sealing and water leakage.                                                 
  6. Hold the upper part of the machine with your hand, hold the funnel handle, and rotate the high-pressure funnel assembly from position "" counterclockwise to position "" (must be tightened);
  7. Put the coffee cup on the wastewater plate cover and aim it at the water outlet;
  8. Touch the double cup coffee switch "", the double cup coffee indicator light "" breath flashes, the machine starts to pump water to start making espresso;
  9. The coffee machine automatically stops working (the indicator ""  ""  ""  is always on), when the coffee is made, and then remove the coffee cup;
  10. Warning: Don't leave the coffee machine unattended while making coffee because it is sometimes done by hand.
  11. After making coffee, rotate the high-pressure funnel assembly clockwise, clean up the coffee grounds in the filter in time, and rinse them with hot water. Touch the single-cup or double-cup coffee switch, release water and rinse the water outlet, install the clean high-pressure funnel assembly on the water outlet, and wait for the next coffee production;
  12. When making a single cup of coffee, choose a single cup of coffee filter and add powder 9-9.5g of coffee powder. Touch the single cup of a coffee switch "" when making, and start to make a single espresso coffee. Other steps refer to the double cup of coffee making.
  13. Note: When used, watch out for the part of the machine with the higher temperature. Especially the water outlet (the funnel), funnel, and steam pipe. When operating, please do not place your hand in the above part for any reason.

  • How to make a good cup of coffee
  • The thickness of coffee grinding largely determines the quality of coffee making, if the coffee grinding is too coarse, the coffee extraction is insufficient, the taste will be lighter, the oil will be light, and the color of the oil is white; if the coffee grinding is too fine, the coffee will be too black and the oil will be too little. Good coffee must use fresh beans and freshly ground coffee powder (using a knife grinder). The freshness of the beans is very important, and long periods of storage will decompose the fat of the beans.
  1. Use the bean grinder, first, adjust the appropriate grinding thickness, and then pour the fresh coffee beans into the grinding cavity for grinding;
  2. Note: Small changes in the fineness of coffee powder will produce large changes in extraction pressure and coffee volume. Please adjust the fineness of the mill by extracting 40-60ml coffee as the reference according to the mill instructions.                                                      
  3. It is recommended to weigh the coffee each time to ensure the appropriate amount of coffee powder (single cup: 9-9.5g; double cup: 16-16.5g), and press the coffee powder with a powder press;               
  4. The surface of the pressed coffee powder is about 3mm away from the edge of the filter cup (an important indicator). Too high or too low will affect the coffee extraction pressure and effect, please reduce or increase the amount of coffee powder accordingly;    
  5. Coffee-making time: 22 seconds single cup; 32 seconds double cup, the machine has set the time;
  6. Coffee solution volume: 25-35g per cup; double cup: 40-60g, which can be adjusted by grinding ground coffee powder thickness (important indicator).
  • Making the cappuccino coffee
  1. Use a large enough cup, press part B, and prepare the espresso first;
  2. Take a special steel cup and pour in 1 / 3 cup of the cold whole-fat pure milk of about 4-8℃; (not hot)
  3. Note: Choose the size of the cup, it is recommended that the diameter of the cup is not less than 70 ± 5mm, due to the volume of milk after foaming will increase, making sure the cup has enough height.
  4. Touch the steam preheating switch "", and start the steam preheating, the single and double cup coffee indicator light is out, the steam indicator light starts to flash, after the steam light is always on, the preheating steam is completed;
  5. Put an empty cup under the steam tube, turn the "steam knob" to the maximum position in a counterclockwise direction, release a little water in the steam tube, and then turn the steam to turn the "steam knob" clockwise to close the steam.
  6. Put the special steel cup under the steam pipe nozzle, and let the steam pipe nozzle float under the milk liquid level;
  7. Open the steam knob, release the steam, adjust the height of the milk cup, and make the milk bubble;
  8. When the milk and foam reach the desired amount, close the knob, the steam stops, pour the foaming milk into the prepared espresso, and the cappuccino is finished. According to their own taste, add the right amount of sugar or cocoa powder on the top;
  9. Note: After the steam stops spraying, please immediately clean the steam tube assembly and release the milk in the tube to prevent the foam from scaling on the tube wall. During the operation, because the steam tube surface temperature is very high, you must not be scalded.
  • Making the hot water
  1. Take a cup and place it under the hot water nozzle;
  2. When the single and double cup coffee indicator and steam indicator are always on, turn on the steam button switch, and the hot water flows out of the steam nozzle. In the process of making hot water, the single-cup coffee indicator "" breathing flashes;
  3. When the hot water reaches the required amount, turn the "steam knob" clockwise to the closed position, and the hot water stops flowing out.
  4. Reminder: The hot water function can also be used as a quick cooling function for the coffee machine.
  5. Note: When used, watch out for the part of the machine with the higher temperature. Especially the water outlet (the funnel), funnel, and steam pipe. When operating, please do not place your hand in the above part for any reason.
  • Heating of the liquid
  1. Take a professional steel cup and pour in 1 / 2 cups of cold liquid;
  2. Note: to choose the size of the cup, it is recommended that the diameter of the cup is not less than 70 ± 5mm, because it is steam heating
  3. Touch the steam switch "", and start the steam preheating, the single and double cup coffee indicator light is out, the steam indicator light starts to flash after the steam light is often on, and the prefabricated steam is completed;
  4. Place the steel cup under the steam pipe nozzle and insert the steam pipe nozzle into the liquid;
  5. Open the steam knob to release the steam;
  6. When the liquid is heated to the desired temperature, close the knob, and the steam stops.
  7. Note: After the steam stops spraying, please immediately clean the steam tube assembly and release the liquid in the pipe to prevent the liquid from scaling on the pipe wall. During the operation, due to the high surface temperature of the steam tube, do not be scalded.
  • Indicator light indication

Single-serve coffee

Indicator light

Double coffee

Indicator light

Steam

Indicator light

Reason

 Solution

Flashing

Flashing

Flashing

Preheat for coffee and hot water

 

Keep the Lights On

Keep the Lights On

Keep the Lights On

Coffee and hot water are preheated

 

Breathing light flicker

The light goes out

The light goes out

Single-cup of coffee or hot water in the making

 

The light goes out

Breathing light flicker

The light goes out

Two cups in coffee making

 

The light goes out

The light goes out

Flashing

In prefabricated steam

 

The light goes out

The light goes out

Keep the Lights On

Prefabricated steam completed

 

The light goes out

The light goes out

Breathing light flicker

Make steam

 

The light goes out

The light goes out

Keep the Lights On

Steam production completed

 

Quick flashing

Quick flashing

Quick flashing

Short circuit or open circuit of the temperature sensor or open circuit of temperature fuse or poor contact between power panel and display board cable

Please contact the specially engaged service center

Quick flashing

Quick flashing

Quick flashing

After the steam production, touch the steam switch (the temperature is too high)

Wait for a moment until the temperature drops naturally or turn on the steam switch to use hot water to cool down

The light goes out

The light goes out

The light goes out

Shut down

 

The light goes out

Breathing light flicker

The light goes out

Stand by for over 30 minutes

Touch screen switch

The light goes out

The light goes out

quick flashing

The steam knob is not closed during the startup process

Tighten the steam knob

Ⅳ. Cleaning and maintenance

  1. Disconnect the power plug before cleaning to fully cool the coffee machine;
  2. Use a clean wet cloth to clean the stainless steel surface;
  3. Note: Do not use alcohol or solvents, and do not immerse the machine in water for cleaning;
  4. Use the coffee machine's special brush to clean up the water outlet and the internal sealing ring;
  5. Remove the high-pressure funnel assembly by rotating clockwise, pour out the coffee grounds inside, and then clean the filter screen and funnel with the cleaning liquid, but finally be sure to rinse with clean water;
  6. Wash all the accessories in water and dry them thoroughly;
  7. Often empty and clean the water plate and wastewater plate cover;
  8. Clean the water tank frequently.
  • Clean the mineral precipitate
  1. In order to ensure the normal use function of the coffee machine, clean internal water channel and pure taste of coffee, the coffee machine should be removed and maintained after 2-3 months of use;
  2. Add water and scale remover to the tank to MAX (about 1.4L, water and scale remover ratio of 4:1, the specific proportion to the use of the scale remover guide), please use "home coffee machine scale remover" or to the service center to buy special scale remover, if there is no scale remover, citric acid instead (water and citric acid ratio is 100:3);
  3. Turn the high-pressure funnel assembly (no coffee powder) into the funnel bracket according to the coffee-making steps, and make the coffee according to Part B;
  4. Press the power button, touch the double-cup coffee switch when the coffee indicator is on, then make double-cup coffee once; then open the steam knob, put 2min hot water and close the knob, let the scale remover stay in the machine for at least 15 minutes;
  5. Repeat step 4 for 3 times;
  6. Then touch the double-cup coffee switch and start to make coffee (many times) until all the scale remover flows out;
  7. Use tap water to make double cups of coffee (no coffee powder), repeat the 4 steps 3 times (but do not wait for 15 minutes in step 4), then make double cups of coffee (no coffee powder), repeat many times until there is no water in the water tank;
  8. Repeat Step 7 at least 3 times to ensure that all the pipes are cleaned.

Ⅴ. Safety instruction

  • Before using this machine, please read these instructions carefully and follow the following operations:
  1. Before use, please check whether the used voltage used is consistent with the product nameplate;
  2. The coffee machine must be connected to the grounding socket;
  3. When using the coffee machine, someone should watch, do not let the children and people unable to take care of themselves close to the coffee machine;
  4. Do not place the coffee machine on a hot surface or near an open fire to avoid damage to the coffee machine.
  5. Please unplug the coffee machine without using or cleaning the coffee machine, and cool the coffee machine before installing or removing the coffee machine parts or cleaning it;
  6. If the coffee machine can not work properly due to any failure or other reasons, please take the coffee machine to a qualified service provider for testing and repair;
  7. If the power cord is damaged, it must be replaced by the manufacturer, its maintenance department or similar departments to avoid danger;
  8. When the coffee machine fails, please do not use the components not of the designated manufacturer, which will cause harm or potential danger to the user;
  9. The coffee machine should be placed on the table or flat place, do not hang the power cord on the edge of the table or table;
  10. Make that the power cord does not contact the high hot portion of the coffee maker.
  11. When the coffee machine is working, some parts will be heated to high temperature (such as steam, funnel bracket, steam pipe nozzle, high-pressure funnel, etc.) do not touch directly, when using, please hold the funnel handle;
  12. Do not immerse the coffee machine or power cord plug in water or other liquid;
  13. Do not put the machine in a temperature below zero environment, because the boiler and water pump have residual water, become ice will damage the machine;
  14. When adding water to the water tank, pay attention to the highest water level line, and shall not exceed the "MAX" mark line;
  15. In case of any fault, defect, or suspicious defect caused by the fall of the machine, you should unplug the power plug immediately, and do not operate the machine with the problem;
  16. The device is used in homes and similar applications such as: -stores, offices, and other employee kitchens; not used outdoors;
  17. Please keep this manual after reading it for future reference.

Ⅵ. FAQ

  • Q1: How to make the steam stick produce hot water?
  • A1: After the product is heated, do not select the steam gear, but directly turn the knob to the hot water gear.

  • Q2: What kind of coffee does it support?
  • A2: It supports to use coffee powder.

  • Q3: Why is the indication light shining continuously?
  • A3: It means it's heating for coffee and water.

  • Q4: Can it make milk foam?
  • A4: Yes, it supports.

  • Q5: Can it preheat the coffee cup on it?
  • A6: Yes, it supports.