SPECIFICATIONS
Product Name |
Model No. |
Filter material |
Flow rate |
Working pressure |
Working temperature |
DRINKING WATER FILTRATION | JSQH004 |
Ceramic diatom compounds |
1.0-2.0L/minutes |
0.1~0.4MPa |
5-38°C |
ILLUSTRATION
①Main Housing
②Purified Water Outlet
③Tap Connector Parts
④Faucet Connector Switch Button
⑤Purified Water Switch
⑥Raw Water Outlet
①22 inner thread connector
②24 inner thread connector
③22 outer thread connector
④24 outer thread connector
⑤multifunctional connector
⑥22 waterproof pad
⑦24 waterproof pad
⑧wrench
ASSEMBLY
- Installation method of threadless faucet
Please prepare a slotted screwdriver for installation. Use the slotted screwdriver to loosen the multifunctional connector, and then insert it on the water outlet of the threadless faucet. Tighten the ring of the multifunctional connector with the screwdriver, then place the waterproof pad on a suitable inner thread connector and connect to the multi-function connector.
Insert the faucet filtration system into the faucet connector, and then turn on the faucet to see if it works normally and check for water leakage in each parts. If there is no water leakage, the installation is complete.
- Installation method of internal faucet
Note: Waterproof pads must be placed in the internal faucet, otherwise there will be water leakage at the connection point.
①22 outer thread connector
②24 outer thread connector
③22 waterproof pad
④24 waterproof pad
Unscrew the bubbler on the faucet, and put the waterproof pad into the outlet of the internal faucet, then connect the appropriate external connector to the outlet of the internal faucet, and tighten it.
Insert the faucet filtration system into the faucet connector, and then turn on the faucet to see if it works normally and check for water leakage in each parts. If there is no water leakage, the installation is complete.
- Installation method of external faucet
Note: Waterproof pads must be placed in the internal faucet, otherwise there will be water leakage at the connection point.
①waterproof pad
②22 inner thread connector
③24 inner thread connector
Unscrew the bubbler on the faucet, and put the waterproof pad on the appropriate inner thread connector, then connect to the outlet of the external faucet, and tighten it.
Insert the faucet filtration system into the faucet connector, and then turn on the faucet to see if it works normally and check for water leakage in each parts. If there is no water leakage, the installation is complete.
MAINTENANCE
Make sure the product functions properly, and replace the filter cartridge when any of the following situations occur:
- The output of purified water is significantly reduced.
- The purified water has a smell or is still
- The cartridge has been used for more than a certain period of time.
- Recommended replacement cycle: 6 months
CAUTION
- Please do not block the water outlet of the productor connect it with other devices to avoid damage.
- Children canuse the product only under adult supervision to avoid accidental injury.
- If you encounter any problems during use or installation, please feel free to contact our customer service.