SG/MY-ELECTRIC TOOTHBRUSH DDYS008 USER MANUAL

SPECIFICATIONS

ILLUTRATION

1. Button
2. Gear indicator light
3. Airplane mode
4. Power indicator
5. Charging base

OPERATION

1. Installation and Replacement of Brush Head:Installation: The front of the brush head should be in the same direction as the front of the toothbrush handle. Press the toothbrush downward and install it on the handle, ensuring that there is a certain gap between the two parts (the gap is a necessary operating gap, not a malfunction) ; Replacement: Hold the handle, pull the brush head upwards with a little force, and then install a new brush head.
2. Power on and off and mode switching

Click to start/pause, double-click to switch gears;

• Gear1: Sensitive mode, suitable for first-time users and users with sensitive teeth;
• Gear2: Cleaning mode, suitable for daily use and users who pursue excellent cleaning results;
• Gear3: Whitening mode, suitable for removing tartar and powerful whitening and users with higher needs;
• Gear 4: low-level massage mode, suitable for users who massage gums and promote blood circulation;
• Gear 5: mid-range polishing mode, suitable for users who polish the tooth surface to make it smoother;
• Gear 6: High-speed mode, suitablefor deep cleaning and users who pursue high-frequency vibration;
• In non-working state, it will automaticallysleep if there is no operation for 5 seconds.
• Intelligent wake-up in non-flight mode: Hold the toothbrush at a certain angle to wake up the toothbrush tothe paused state, the power indicator light and mode light are on;
• Duration reminder: After 2 minutes of use, the toothbrush automatically shuts down; Every 30 seconds, the toothbrush vibrates intermittently 2 times, automatically prompting Change zones;
• Airplane mode: In any state, press and hold the power button for 3seconds to enter airplane mode, and press and hold for 3 seconds to unlock.

3. Charging

Battery indicator:

The first time you use the battery, it will not be fully charged and needs to be charged. When charging, pay attention to the following:

• Make sure the end of the brush must be in contact with the bottom of the magnetic charger.
• Connect the magnetic charging dock to the Type-C port, connect the USB to the power adapter, charge with a power outlet with 100 - 240V alternating current, 50/60Hz power source.

4. Accessories

This product includes: body*1, standard gum protection brush head*1, efficient cleaning brush head*1, light-sensitive whitening brush head*1, magnetic charging base*1, base charging cable*1

Choose the right brush head:

① Standard gum protection

Features of the brush head: ultra-fine soft bristles go deep into the gaps between teeth, dean and protect gums;

Applicable people: those who pursue gentle cleaning and meet daily brushing needs.

② Efficient cleaning 

Brush head features: C-shaped bristles fit the tooth surface, cleaning efficiently and effortlessly; Applicable people: Pursuing efficient cleaning, satisfying the needs of cleanliness and white cleaning needs.

③ Light and brightening 

Brush head features: W-shaped 3D bristles design, increases polishing area, Restore a bright smile; Applicable people: those who pursue powerful cleaning and are satisfied with teeth whitening.

*The tooth cleaning brush head needs to be purchased separately.

CAUTION

1. Please do not expose the device or battery to excessive temperatures.
2. After discovering battery leakage, you should stop using the device immediately and dispose of it in accordance withlocal environmental laws and guidelines. Do not throw away leaked batteries with ordinary household waste.
3. Do not place the charging parts of this product in humid environments and water.
4. Do not charge when there is liquid in the charging port.
5. This device contains a non-replaceable battery. When the battery life ends, the device should be properly disposedof according to environmental recycling instructions.
6. To ensure the effectiveness of battery charging, please perform charging operations within the temperature range of0℃ to 45℃ to avoid the situation where the battery cannot be fully charged or the charging effect is poor.
7. Please check the power supply device regularly for damage. If it is damaged, please stop using it immediately andreplace it in time.
8. Do not knock or drop this product. If the product is damaged, especially the brush handle and brush head, please donot continue to use it.
9. Do not modify or repair this product by yourself.
10. Do not use chemicals such as paint thinner to clean this product.
11. Do not charge in water.
12. When using this product for the first time, you may experience tooth discomfort or slight gum bleeding. This isbecause your gums are not used to this efficient cleaning. It is recommended to use the first-time use mode first. This phenomenon usually stops within 1-2 weeks. If it exceeds 2 weeks, please stop using it and consult a doctor.
13. This product complies with the safety standards of electromagnetic devices.For any questions involving pacemakers or other implanted devices, please consult your doctor or the supplier of the implanted device before use.
14. This product is only designed to clean teeth, gums and tongue, please do not use it for other purposes.
15. Users of dental repairs, orthodontics, dental implants, etc, should use it under the guidance of a dentist: if youencounter obvious bleeding, discomfort, pain or medical problems, please consult your dentist or physician.
16. This product is not suitable for use by children, people with impaired limbs or people with certain sensory andmental disabilities or severe lack of experience. Please use this product safely under the supervision of others and understand the possible risks.
17. Do not share the brush head with others.
18. It is recommended to replace the brush head every three months. If the brush head is damaged or deformed, pleasereplace it in time.
19. This product can only be used with the company's special brush heads for electric toothbrushes. We are not responsible for the consequences of using other unofficially certified brush head products.
20. Keep the charging base dry. Do not accumulate liquid or metal objects on the contacts of the charging base toprevent electrolytic oxidation and conduction of the contacts.