SG/MY-HAIR DRYER CFJH011 USER MANUAL

SPECIFICATIONS

ILLUSTRATION

1. LED Indicator Light
2. Fan Speed Slider/Control
3. Temperature Control
4. Air Inlet
5. Removable Filter Cover
6. Power Cord

OPERATION

1. Switch/Fan Speed Levels

First upward switch of the power button: Speed Level 1

Second upward switch: Speed Level 2

(1) Power off (0)

(2) Low speed (―)

(3) High speed (=)

2. Temperature Settings / Cleaning Mode

(1) Temperature Switching: Press the temperature button briefly to cycle through the following modes:

Level 1: Cool Air (Blue Light) → Level 2: Warm Air (Green Light) → Level 3: Hot Air (Orange Light) → Level 4: High Temperature (Red Light) → Level 5: Cold/Hot Air Cycle (Blue, Orange, Green, and Red lights flashing in sequence)

(2) Temperature Memory: The product automatically remembers the last used temperature setting for future operation.

(3) Self-Cleaning Mode: The self-cleaning mode is activated by reversing the motor to blow air outward, which helps remove dust from the dust filter. To start the cleaning mode in the off state, follow these steps: Long-press the temperature button while simultaneously sliding the fan speed switch upward to any setting. Turn on the machine. After approximately 3–5 seconds, the device will enter self-cleaning mode. The indicator light will flash red, the motor will reverse, and air will be blown out from the air intake. After about 8 seconds, the self-cleaning process will be complete, and the machine will automatically shut off.

Note: During the self-cleaning process, there is no need to continue long-pressing the temperature button. If you wish to interrupt the self-cleaning process, adjust the fan speed switch to the “O” position to manually turn off the machine.

3. One-Touch Cool Air Mode

Press and hold the temperature button for more than 1.5 seconds to activate One-Touch Cool Air. Release the button to return to the original setting.

CLEANING AND MAINTENANCE

1. The filter needs regular cleaning and maintenance to avoid debris blockage, ensuring smooth air intake.
2. Before cleaning the filter, please ensure the hairdryer is turned off and the power plug is unplugged.
3. The air intake filter is secured with a rotating latch. Grip the handle and rotate counterclockwise to remove the air intake filter and detach it from the handle.

4. Do not clean the stainless steel filter with water, as this may cause malfunction.
5. Use a dry, lint-free cloth, soft brush, or toothbrush to remove any debris from the surface of the air intake filter and stainless steel filter.
6. After cleaning, align the air intake filter with the handle slot and rotate it clockwise to tighten into place. A "click" sound indicates the filter is properly installed.

7. When cleaning, ensure the power switch is turned off and the power plug is unplugged.
8. Regularly use a towel, cotton swabs, or toothbrush to remove any debris from the air intake and exhaust vents.
9. Do not press or rub the air intake and exhaust vents with your nails or sharp objects to avoid damaging the product.
10. Do not use alcohol, nail polish remover, or detergents to clean this product, as this may cause malfunctions, cracking, or discoloration.
11. If the power cord is damaged, for safety reasons, it must be replaced by a professional from the manufacturer, its service department, or a similar professional entity.

CAUTION

1. Do not block the air intake of the hair dryer while in operation, as this could cause the heating element to overheat, potentially leading to a fire.
2. Do not immerse the hair dryer in water.
3. Do not use the hair dryer in a damp environment.
4. Keep the hair dryer dry, as moisture may lead to electric shock.
5. Do not use the hair dryer with wet hands, as this may cause electric shock or a short circuit, potentially leading to a fire.
6. Do not use the hair dryer near petroleum gas or other flammable substances (such as paint thinners, spray cans, etc.), as this may cause an explosion or a fire due to a short circuit.
7. Do not wind the power cord around the main body of the product when storing it, as this could cause the cord to break, leading to electric shock or a short circuit, potentially causing a fire.
8. Do not store the product within the reach of children or infants, as this may result in electric shock or injury.
9. Do not attempt to repair, disassemble, or modify the product yourself, as this may lead to fire or malfunction, resulting in injury.
10. Do not use the product if the power cord or plug is damaged or overheated, as this may cause burns, electric shock, or a fire due to a short circuit.
11. Do not use this product near a bathtub, shower, wash basin, or any other water-containing vessels.
12. During use, the air outlet and nozzle may become hot. Do not touch them with your hands, as this could cause burns.
13. Do not use the hair dryer on infants or young children, as it may cause burns.
14. When using the hair dryer in the bathroom, unplug the unit after use.
15. Do not pull the power cord forcefully, as this could cause the cord to break, leading to electric shock or a short circuit, potentially causing a fire.
16. This product is intended only for drying hair and styling purposes. Do not use it to dry shoes or clothes, as this may lead to a fire due to a short circuit.
17. Do not drop any foreign objects (especially metal items) into the air intake, as this may cause electric shock, explosion, or fire due to short circuits or heating element malfunction.