Open the water filling port cover and add appropriate amount of water through the filler into the water tank slowly with a specialized measuring cup. Do not exceed the maximum capacity.
The machine starts heating after power is turned on. You can start ironing when the heating indicator light stays on which means heating is complete. Please do not iron high-temperature- sensitive fabrics directly since the temperature of heating plate cannot be adjusted, thus it is recommended to cover the fabric to be ironed with a wet towel first.
After adding water, plug in. At this time, the indicator light flashes which means the product is heated (there is no use to press the steam spray button). After 30 seconds, when the indicator light stops flashing and turns solid which means that preheating is completed, press the steam spray button to start ironing. After use, please press the steam button again to stop the water pump and steam spraying before unplugging the machine.
The sound will be loud when the product is first turned on. This is a normal pumping sound caused by pumping in and heating water inside. When using this product for the first time, please try to spray steam on a discarded fabric for a period of time because some water droplets will come out together with the steam before the temperature of the product stabilizes. Spray the steam on the clothes to be ironed after the steam is stabilized. When using the steam injection function for the first time, a small amount of white particles will be brought out, which is normal.
Check the ironing instruction on the fabric before ironing. Please strictly follow the ironing instructions. Some clothes need to be ironed with a cloth below, and some cannot be ironed with steam.
Three usage status:
0° folded state
90° folded state
180° folded state
Ⅳ. Cleaning and Maintaining
Do not clean the iron until it completely cools down. Unplug and cool it for more than 60 minutes.
Always empty the water tank after use.
Store the machine in a dry space after drying it with a towel,
Always make sure the steam outlet is clean, free of dirt and not blocked.
After long-term use of the machine, dirt may appear on the steam outlet and panel. You can use a clean towel dipped in water and vinegar (mix water and vinegar in a 1:1 ratio) to clean the surface dirt.
Ⅴ. Safety Precautions
Do not use this machine without reading this manual in detail.
Please use this machine according to the purposes mentioned in this book and do not use it for other purposes.
The water used by this machine is required to be drinking-grade domestic water. If you are ironing important fabrics, it is recommended to use pure water.
Before using this machine, make sure that the working voltage of this machine is consistent with the power supply voltage in your home; please use it under a power supply equipped with a 30mA leakage protection switch, and you must use a socket with a rated current of not less than 6A.
Before using this machine, please fully unfold the power cord. Do not share the same power supply with other high-power electrical appliances. Do not use a power strip to prevent the power strip from being overloaded and causing a fire.
Before using this machine, please add water lower than the maximum water level and install the required accessories before plugging in.
Do not add solutions such as cleaning agents to the water tank.
This machine is not suitable for people with physical, sensory or mental disabilities, and lack of relevant experience and knowledge, and children unless they are under the supervision and guidance of normal people.
Children are prohibited from using and playing with this unit.
When the machine is in normal use, the ironing plate should be kept away from people, animals, household appliances and other equipment. When not in use, please turn off the power to prevent the steam from injuring people or damaging other items.
Do not touch the heated nozzle when using the machine.
When you need to wipe the machine, please use a clean soft cloth and neutral detergent instead of solvents such as gasoline, alcohol, banana water, etc. At the same time, ensure that no liquid enters the inside of the machine.
Do not leave the machine in a harsh environment with moisture, strong sunlight or corrosive gas for a long time.
If the supply cord is damaged, it must be replaced by maintenance department or qualified personnel i to avoid accidents.
If any parts of the machine are damaged, especially the safety protection device or the power cord, please notify the professionals at our company's maintenance service center for repair and do not continue to use it or repair it without authorization.
This machine is for indoor use only.
Be careful of steam splash when using the product.
When filling or cleaning, please unplug the machine.
Be careful of burns and high-temperature steam.
When the product is powered on, the user must not leave
The iron must be used and rested on a stable surface.
When placing the iron on its stand, make sure it is on a stable surface.
Do not use the iron if it has been dropped, had visible signs of damage, or been leaking,
Please do not point the steam nozzle of the product at people or animals to avoid being burned by the steam.
When using various detachable accessories of this machine, please make sure that there is no steam and the accessories are cooled down to avoid being burned by steam.
Do not immerse this product in water or other liquids or rinse it under the tap.
Before installation and use, please read the instructions carefully.
Please do not disassemble or repair this machine yourself.