USB Fan DFSH011 User Manual English Version

Ⅰ. Product parameters

Ⅱ. Components and installation drawings

1. Fan body
2. LED charge indication
3. Fan blade
4. Led illuminating lamp
5. Face shell
6. Rope hole
7. USB output interface
8. Type-C charging port
9. Switch/shift key
10. Type-C charging wire

Ⅲ. Operation Instructions

• Switch

Short Press on Switch: Products can be adjusted in the first, second, third gear wind and shutdown state in turn.

LED lights function: long press 3 seconds to turn on LED lights, 3 seconds again to turn off the LED lighting.

• Power display

1. When the fan is started or charged, the electric quantity  display  is always on.
2. When the battery power of this product is 10% which means the battery power is insufficient, and the digital display flashes
3. When this product charges mobile phones, digital products and other devices, the digital tube is always on.

• Function description

1. When the battery is low, the fan and the flashlight may not start properly and need to be charged to sufficient power before next operation.
2. Usually, before starting the fan, you need to charge it in time until the power is sufficient, then operate.
3. When the fan works, long press the switch key to switch the flashlight function.
4. When the flashlight is turned on, press the switch key to turn off the flashlight before turning on the fan.
5. When the power is reduced to a lower level, the fan will choose the operating gear according to the power level.
6. Equipped with a current detection function, when the fan is in working condition or the rotation is blocked or encounters obstacles such as fingers, it will stop rotating immediately, so as not to cause harm to the human body, and it can be restarted after removing obstacles.

• FAN instruction

1. Use your finger to cut out the main body of fan according to the drawing;

   pull out the Fan at this position

2. The utility model can be unfolded and held for use;
3. You can also rotate the mask to 270 degrees and place it on your desk.

Ⅳ. Precautions

1. This machine uses lithium-ion batterywithout memory effect. It can be used with charge.
2. Please charge the fan before the battery runs,which is conducive to extending battery life.
3. When the fan works, the fan blade will rotate athigh speed. It will stop immediately after encountering the external obstruction. Only after removing the fault or obstruction can the fan work normally.
4. This product is not a children's toy. Children under the age of 10 should use it under the supervision of an adult to avoid danger.
5. If the battery operating environment temperature exceeds 60 degrees Celsius or the battery is squeezed and dissected,the battery life will be severely shortened,and there may even be a risk of leakage or explosion.
6. Please do not use this product while charging
7. Do not point the beam of your flashlight at anyone's eyes.
8. Do not touch the rotating fan blades with your hands. Keep your distance from long-haired people so that your hair will not be involved.
9. When this product is not in use, please take back the fan body to avoid damage to the product.
10. When closing the cover, please hold the two blades together.