Vacuum Cleaner XCQH017 User Manual

Ⅰ. SPECIFICATIONS

Ⅱ. ILLUSTRATION

① Main Unit 

② Dust Cup Release Button      

③ Metal Filter Assembly      

④ Dust Cup       

⑤ Dust Cup Lid Button       

⑥ Dust Cup Lid            

⑦Mode Button & Battery Indicator        

⑧ Battery Pack          

⑨Charging Port        

⑩ Battery Pack Release Button

⑪ Handle

⑫ Power Button

⑬ Air Outlet

⑭ Outlet HEPA Filter

⑮ Brush Roll

⑯ Brush Roll Release Button

⑰ Extension Tube

⑱ Extension Tube Release Button

⑲ Wall Mount Bracket 

Ⅲ.  OPERATION

• Installation Diagram

①Install the floor brush     ②Installing other attachments      ③Store the attachments

• Charging

Method 1:
Connect the charging cable to the battery pack while it is attached to the device (Figure 1), or remove the battery pack and charge it separately by connecting the charging cable (Figure 2).

Method 2:
Connect the charging cable to the fully assembled vacuum cleaner (Figure 3).

Figure 3

• How to Use

1. Before use, make sure the vacuum cleaner is sufficiently charged. For first-time use, charge it for 3–4 hours.
2. Press the power button to turn on the vacuum cleaner. Press it again to turn it off (Figure 4).
   
   

Figure 4

3. The vacuum cleaner starts in low suction mode by default. Touching the on-screen button switches between low and high suction modes.
4. During operation, the LED screen remains illuminated, showing the current mode and remaining battery level.
   
   

5. The floor brush is equipped with four LED lights that remain on during operation, making it easier to illuminate dust and debris on the floor.

• Accessories Description

1. Crevice Nozzle: Designed for cleaning dust from narrow areas such as windowsills, bed frames, and furniture gaps.
   
   

2. 2-in-1 Combination Brush: Effectively removes dust and hair from carpets, bedding, and curtains.
   
   

3. Soft Roller Brush: Effectively removes dust, debris, and hair from floors or tiles.

Ⅳ. MAINTENANCE

To extend the lifespan of the machine, it is recommended to clean the inlet HEPA and outlet HEPA filters every month.

• Cleaning the Dust Cup

1. Press the power button to turn off the vacuum cleaner.
2. Press the dust cup lid button to empty the contents of the dust cup, then rotate to remove the metal filter assembly (Figure 5).
3. Press the dust cup release button to remove the dust cup and take out the filter (Figure 6).

4. The metal filter assembly, filter, and dust cup can be rinsed with water. After cleaning, wipe them dry and let them air dry in a shaded area.
5. Once all components are completely dry, reassemble the dust cup and then attach it to the main unit for normal use.
   
   

• Cleaning the Air Outlet Sponge Filter

1. With the vacuum cleaner turned off, rotate the cover on the handle to remove the sponge filter (Figure 7).
2. Shake off the dust from the sponge filter, rinse it with water, and allow it to air dry in a shaded area.
3. Once the sponge filter is completely dry, reinsert it for use.

• Cleaning the Floor Brush

1. Press the button to remove the floor brush head.
2. Slide the button on the side of the floor brush to remove the roller brush (Figure 8).
3. Use a small brush and cloth to clean the roller brush, ensuring it is completely dry before reattaching it to the machine for use.

Ⅴ. CAUTION

Before using the machine, please read this manual carefully.

1. For first-time use or after long storage, ensure the battery is fully charged. If the vacuum is stored for an extended period, run and charge it every 3 months to maintain battery performance.
2. Do not use the vacuum to pick up water, cleaning agents, or any liquid substances.
3. Do not vacuum fine particles such as flour, cement, plaster dust, or large objects like toys or paper balls, as they may damage the motor or cause blockages.
4. Do not spill water or other liquids on the machine or pour liquids into it to prevent short-circuiting.
5. Clean the machine with a dry cloth. Avoid using cleaning agents such as gasoline or paint thinner, as they may cause cracking or discoloration.
6. Do not use or store the machine in extremely high or low temperatures.
7. It is recommended to use the machine in a temperature range of 0°C to 40°C, and store it in a cool, dry place, avoiding prolonged exposure to sunlight.
8. After charging or during cleaning and maintenance, unplug the adapter and avoid pulling the power cord.
9. Recycle old batteries and do not dispose of them carelessly. The battery pack is designed for use with this device only and should only be charged with the provided adapter. It must not be used for other purposes.
10. Do not disassemble the battery pack or allow it to come into contact with liquids to avoid damage or electrical shock.
11. Do not place the battery pack near high-temperature objects or fire. Do not puncture or damage the battery pack with sharp objects to prevent hazards.
12. If the machine does not work properly or if parts are damaged, please contact customer service. Do not attempt to disassemble it yourself to avoid danger.
13. Do not allow children to operate or play with this device, nor allow children to charge the battery, to prevent accidents.

Ⅵ. Troubleshooting

*  For any issues, please do not hesitate to contact our customer service team for assistance.