Shopping Cart

Wireless Blender ZZJH007 User Manual English Version

Ⅰ. Product Parameters

Product Name

Model NO.

Battery Voltage

Battery Capacity

Rated Power

Wireless Blender





Ⅱ. Product Display

  1. Host
  2. Blender cup
  3. Power button
  4. Charging port
  5. Stirring blade
  6. Indicator light
  7. Lid switch
  8. Direct drinking spouts
  9. Hanging ring
  10. Straps
  11. Charging cable

Ⅲ. Instructions

  1. Before first use, please ensure that the battery is fully charged. This product is equipped with double safety protection. Only when the host is screwed and fixed on the cup body can you double-click the power button to start working.
  2. Peel and remove the core of the fruit, cut into small pieces of about 10*10*10mm, and load no more than 120g food.
  3. Add fruit and an appropriate amount of drinking water (under 60°C) or milk into the cup, and be careful not to exceed the scale line of the maximum stirring capacity (500mL).
  4. Rotate the host to the cup body one circle, and align the switch with the middle of the cup body (as shown in the figure). The indicator light turns green and flashes, indicating that it has been tightened.


  1. Double-click the power button to start, and then slowly turn the machine upside down. When the product  is working, you can hold it at a 45-degree angle and shake for a better stirring effect. (The host must be turned upside down to complete the juice mixing work. The single working time of this product is set to 40 seconds.)
  2. After the work is done, the product needs to be re-aligned.  Unscrew the lid to drink. (Press the power button once to stop working.)
  3. When the battery is low, the red light flashes during work to indicate that it needs to be charged. When charging, the red light is on. When fully charged, green light will be on.
  4. When the product is charging, please do not start the machine to work
  • Safety precautions
  1. Do not blend without liquid!
  2. Do not blend hard ingredients!
  3. The water temperature should not exceed 60°C!
  4. Do not store and use in a strong magnetic environment or near magnets!
  • Charging steps:
  1. Connect the charging cable, and connect the USB plug of it to the power input port of the host.
  2. Connect the USB plug to the USB port of the phone power adapter or home socket. Before inserting, pay attention to the direction of the USB plug. Hard insertion may cause damage and malfunction. Please use a product with a rated output voltage of 5V and a current of 1A.
  3. Steady red light means charging
  4. Steady green light means fully charged
  • Note: Please make sure to charge for more than 4 hours for the first time to extend battery life.
  • When the product is not in use, do not tighten the main unit and the cup, but keep it slightly loose.
  • Indicator status

Product states

Indicator light

The host is installed in place

Green light flashes 5 times

The host is not installed in place

The green and red lights flash 2 times alternately

The host starts and works normally

Green light on

Knife stuck after the host starts

Red light on

The power is low, the host does not work

Red light on

Ⅳ. Cleaning and Maintaining

  1. Before cleaning, please make sure the blade is stopped.
  2. Do not use steel wool and any chemical or powdery detergent to clean this product.
  3. Do not immerse the host in water or other liquids to avoid damage to components or product leakage. When wiping the host, please pay attention to sharp blades and be careful of scratches.
  4. Do not use chemicals, such as alcohol, to wipe.
  5. When cleaning the surface of the product, please use a soft cloth, and do not use hard tools such as steel wool to clean the surface of the product.
  6. Do not soak any working live parts, such as the main unit and USB cable.
  7. Do not directly shower the host, and do not directly expose the product, USB cable and packaging accessories to the sun.
  8. After cleaning the product, please wipe off the remaining water stains with a dry cloth and place it in a cool place to air dry.

Ⅴ. Safety Precautions

  1. The machine must be placed on a stable and firm workbench, and it is forbidden to use this product on an inclined or unstable table.
  2. Do not place the product in a wet place or immerse it in water or other liquids. Keep the main machine dry when using it.
  3. It is strictly forbidden to open the cup body when the product is working, so as not to interrupt the normal work. Do not put overheated food or liquid higher than 60°C in the cup for stirring.
  4. It is strictly forbidden to disassemble the product shell without permission to avoid possible damage to accessories or other dangers.
  5. During the working process of the machine, it is strictly forbidden to touch the movable parts such as blades and motors, so as not to cause product damage or personal injury.
  6. It is forbidden to place the product too close to the stove or high-temperature surface, so as not to damage the product or cause fire and personal injury.
  7. The working time of this product is 40 seconds each time. After 3 cycles of continuous operation, please stop for 5-10 minutes and wait for the motor to cool down before starting.
  8. It is strictly forbidden to run idling (no ingredients in the cup), overload (that is, directly stir hard objects without adding water), or use excessively.
  9. After using the product, the machine should be cleaned in detail to avoid corrosion of residues and odors caused by prolonged use.
  10. If the product is stuck during use, please turn off the power immediately, remove the container, take out the food that has stuck the blade, and continue to use it after the motor cools down.
  11. If the product body and other parts are damaged, please do not continue to use it, and please send it to the designated maintenance service point for inspection. Non-professional maintenance personnel should not disassemble or modify the product by themselves.
  12. The product should be stored out of the reach of children. Do not let people (including children) with physical disabilities, sensory or mental disabilities, or lack of relevant experience and knowledge (including children) use or play with this product
  13. After processing, please wait for the motor and the blade to stop rotating, and make sure to disconnect the power before removing the host components.
  14. Never immerse the host and the blender jar in water or other liquids, nor wash them under water or other liquids.
  15. The blades are very sharp, you should be careful when taking out the blades, emptying the mixing basin or cleaning to avoid cutting.
  16. This product has a built-in lithium battery. Please store and use this product in an environment of 0~45°C. If it will not be used for a long time, please wipe it clean and place it in a cool and dry place, and charge it every three months.
  17. This product is only suitable for household use, do not use it for other purposes not specified
  18. Do not store and use in a strong magnetic environment or near magnets.