Cart
/

Cordless Vacuum Cleaner XCQH004 User Manual English Version

Ⅰ. Product Technical Parameters

Product name 

Model No. 

 Operating voltage (V) 

 Battery capacity (mAh) 

Rated power of the machine

Charger model

Appliance Classes

Cordless Vacuum Cleaner

XCQH004

22.2 V DC

2000mAh

150W

GQ30-260050-CC

Class Ⅲ

Ⅱ. Product parts schematic diagram and installation steps

  1. Power indicator light
  2. Speed control button
  3. Charging jack
  4. Battery pack
  5. Connect the long rod release button
  6. Electrically brush the release button
  7. Electric floor brushes
  8. Connect the long pole
  9. Dust cup bottom cover release button
  10. Dust Cup
  11. Release the battery pack latch
  12. Power switch
  13. Handle
  14. HEPA Filter
  15. Pre-filter
  16. Flat suction
  17. Two-in-one combination brush
  18. Electric pet brush
  19. Hanging racks
  20. Screws
  21. Switch power adapter
  • Assembly drawing prompt:
  • Before assembly, please take out all accessories from the packaging box and check if they match the packing list.
  1. Insert the battery pack into the groove above the handle of the handheld vacuum cleaner, making sure it is firmly installed. You will hear a clicking sound when it is in place.

  1. Align the mounting hole on the extension wand with the installation position on the handheld vacuum cleaner, and insert it vertically with force until it clicks into place.

  1. Align the mounting hole on the other end of the extension wand with the installation position on the motorized brush, and insert it vertically with force until it clicks into place.
  2. Use the provided screws to fix the bracket to the wall. The height of the bracket should be fixed between 112cm and 140cm. Please make sure there are no obstacles such as pipes or wires behind the fixed area of the bracket on the wall. You can place the flat nozzle and the 2-in-1 combination brush on the bracket for easy access.
  • Warm reminder: do not fix the bracket on a plasterboard wall.

Ⅲ. Operating instructions Warning

  • The motorized brush contains moving parts! To avoid personal injury, do not touch the roller of the brush while the vacuum cleaner is running. Touching the rotating roller may cause cuts, bruises, or other injuries. When maintaining the vacuum cleaner, please turn it off first. If there are children nearby during use, please pay attention to safety.

  • Charging the vacuum cleaner
  • Warning: Before charging, please turn off the vacuum cleaner.
  • Note: It takes about 3.5 hours to fully charge the battery pack after the vacuum cleaner is fully discharged.
  1. There are two ways to charge this product:
  • If the battery pack is on the whole unit, plug the power adapter connector into the charging socket, and then plug the adapter into the power socket to start charging.

  • If the battery pack is used separately, use a power adapter to charge it. Plug the power adapter connector into the charging socket, and then plug the adapter into the power socket to start charging. If the battery pack is on the whole unit, use one hand to press down the battery pack lock, and use the other hand to pull it out.

  1. During charging, the battery level indicator light will flash continuously until the battery pack is fully charged.
  2. After the battery pack is fully charged, the battery level indicator light (indicating 3 levels of battery) will stay on for about 15 seconds and then turn off.
  • Note: If the power switch is pressed, and the vacuum cleaner does not run and the battery level indicator light flashes one bar, the battery pack needs to be connected to the power adapter for charging.
  • Using the vacuum cleaner
  • Warning: Do not use the vacuum cleaner without installing the filter.
  1. Insert the appropriate attachment into the suction nozzle of the vacuum cleaner according to the cleaning needs, and make sure it is firmly installed.

 

  1. Before use, check whether there are any sharp objects stuck in the roller and axle of the motorized brush to avoid scratching the floor when using it.
  2. Press the power switch to start the vacuum cleaner. The initial speed is low.
  3. Press the speed control button once to switch to high speed. The speed control button will light up red. Press the button again to switch back to low speed. The red light on the speed control button will go off.
  4. After use, press the power switch to turn off the vacuum cleaner.

  • Using attachments
  • Warm reminder: If necessary, you can attach the extension wand to the handheld vacuum cleaner, and connect the flat nozzle, 2-in-1 combination brush, or motorized pet brush to the extension wand for cleaning purposes.
  1. Using the flat nozzle: The flat nozzle is suitable for cleaning gaps, corners, etc., such as corners, aluminum alloy doors, and windows, drawers, car seats, keyboards, etc.
  2. Using the 2-in-1 combination brush: The 2-in-1 combination brush is suitable for cleaning the surfaces of soft materials, such as curtains, fabrics, sofas, and beds. You can press the release button to remove the brush head for separate use.

  1. Using the motorized pet brush: The motorized pet brush is suitable for cleaning floors, carpets, animal hair, and other purposes.
  • Summary of accessory uses

Attachment name

Clean area

furniture

Cushion seams

 sofa

Floor seams

Fabric

Stairs

Carpet

Ground

Flat nozzle

 

 2-in-1 combination brush

 

 

 

 

 Motorized pet brush

 

 

 

 

  • Note: Before using it on textiles, please clean and dry the attachment to avoid soiling the fabric.

Ⅵ. Maintenance and Care

  • Warning: Before conducting any maintenance or care, please ensure that the vacuum cleaner is turned off and not charging, otherwise it may cause electric shock or other personal injury.
  • Cleaning the Dust Cup
  • Friendly reminder: To achieve the best suction effect, please empty the dust cup in a timely manner after each use, and do not use the vacuum cleaner without installing the filter.
  1. Place the handheld vacuum cleaner over a trash can and press the dust cup bottom cover release button to release the dust.

  1. After cleaning, close the dust cup bottom cover. You will hear a click when it is completely closed.
  • Cleaning the HEPA Filter and Pre-Filter
  • Friendly reminder: Using clean filters can maintain the best suction effect of the vacuum cleaner. Cleaning the filters in a timely manner after each use can help maintain good suction performance. Alternatively, you can purchase new filters from a designated after-sales center to replace the old ones.
  1. Check the filter frequently. When there is a lot of fiber and hair accumulation on the pre-filter or there is a noticeable dust accumulation on the surface of the HEPA filter, clean it in time.
  2. Press the dust cup bottom cover release button, and then rotate counterclockwise to remove the pre-filter, and then rotate counterclockwise to remove the HEPA filter. You can remove the filter when you hear a click sound.

  1. Clean the HEPA filter by gently tapping or brushing off the dust with a soft brush. Wash the HEPA filter and pre-filter it with warm water. Place all cleaned filters in a well-ventilated area to air dry naturally. It is recommended to dry for at least 24 hours.
  • Friendly reminder: Do not use dirty water to clean the filter, and do not place the pre-filter and HEPA filter in a damp place. Do not expose the filters to sunlight or use a hair dryer to accelerate the drying process as this may damage the filters and shorten their lifespan.
  • Warning: After cleaning the HEPA filter and pre-filter, please make sure they are dry before use. If you use a wet or damp filter, it may cause product damage or personal injury and property damage.
  1. Insert the clean and thoroughly dried HEPA filter counterclockwise into the dust cup, then insert the pre-filter counterclockwise. Finally, close the dust cup bottom cover. You will hear a click when it is completely closed.

  • Cleaning the Motorized Floor Brush and Motorized Pet Brush
  • Friendly reminder: After using for a period of time, there may be debris such as hair, fibers, and threads wrapped around the brush roll, which will directly affect the cleaning effect and need to be cleaned in time.
  • Cleaning the Motorized Floor Brush
  1. Make sure the vacuum cleaner is turned off. Press the floor brush release button to remove the floor brush and flip it over to expose the brush roll.
  2. Insert a coin into the coin slot, rotate counterclockwise to the coin lock, and then lift the side cover of the floor brush to pull out the brush roll.

 

 

  1. Remove the debris wrapped around the brush roll. If necessary, you can use scissors to cut off the hair, threads, and other debris.                                                        
  2. After cleaning, first, install the side cover of the floor brush onto the brush roll, then insert the brush roll into the floor brush and push it to the bottom. Finally, press down on the side cover of the floor brush until you hear a click. 

  3. Insert a coin into the coin slot, and rotate clockwise to the coin lock to lock the brush roll.

  • Cleaning the Motorized Pet Brush
  1. Make sure the vacuum cleaner is turned off. Press the brush release button to remove the pet brush and flip it over to expose the brush roll.
  2. Insert a coin into the coin slot, rotate counterclockwise to release the pet brush cover, and then pull out the brush roll.

  1. Remove the debris wrapped around the brush roll. If necessary, you can use scissors to cut off the hair, threads, and other debris.
  2. Insert the brush roll into the pet brush and push it to the bottom. Then insert a coin into the coin slot of the pet brush, and rotate clockwise to lock the pet brush cover.

  • Clearing the Blockage in the Floor Brush Hose
  1. Press the extension rod release button and separate the extension rod from the floor brush.

  1. Clean the debris and blockages adhering to the hose from the suction port at the bottom of the floor brush.

  • Note: Do not use sharp tools to clean the hose to avoid damaging it.

Ⅴ. Safety Instructions

  • Regarding this Manual
  1. Before using this product, please carefully read and understand all contents of this manual as well as the labels on the product. Install this product according to the instructions in this manual. Please remain alert when using the product and operate it according to the content of the manual, which will ensure your safety. Please keep this manual properly. If you are transferring this product to a third party for use, please attach this manual together with the product. Any operation that does not conform to the instructions in this manual may cause serious personal injury or damage to the product itself. Any loss caused by not following the instructions in this manual is not covered by the company's warranty.
  2. This product is suitable for operation in a household environment.
  • Symbols Used in this Manual
  • Instructions that are extremely important for your personal safety require special attention. Please read these contents carefully to avoid accidents and potential damage to the product.
  1. Warning: Remind you of the risk of possible harm to your health and safety.
  2. Attention: Remind you of the risk of injury to this product or other objects.
  • Children's Safety
  • Warning: for the safety of children, please pay special attention to the following:
  1. This product cannot be used by children or persons with physical disabilities, mental impairment, or a lack of relevant experience and knowledge unless they are supervised or guided by someone responsible for their safety.
  2. Keep this product properly stored away from children and individuals who are unable to judge the risks nearby.
  3. Exceptional caution is necessary when the product is used near children or operated by children, especially during charging, be mindful of not causing children to trip over the charging cord.
  4. The packaging and plastic bags of this product should be kept away from children because they pose a risk of suffocation.
  5. Do not allow children to play with this product as if it were a toy to avoid danger.
  6. When the product is equipped with a roller brush, do not touch any part of the roller brush during use or injury may occur.
  • Scope of Product Use
  • Warning: to reduce the risk of fire, electric shock, and personal injury, the following situations are absolutely prohibited or require special attention:
  1. This product is only suitable for household use. Do not use it for commercial purposes, outdoors, near heat sources, exposed to sunlight, or in high-humidity environments (such as in the rain). Do not immerse the product in liquid, and keep it away from sharp objects to avoid damaging the product. Do not use this product for any other purpose outside the scope of the instructions.
  2. Attention should be paid to the possibility of hair, fingers, and other parts of the body coming into contact with internal parts and causing electric shock or injury.
  3. Attention should be paid to the possibility of accessories on clothing such as neckties, scarves, and cords being caught in the product, creating a dangerous situation.
  4. Do not use this product to draw in burning or smoking objects such as unextinguished cigarette ash, burning cigarette butts or matches, or hot cinders.
  5. Do not vacuum any toxic substances to avoid human harm from dust, gas, and other hazards.
  6. Do not suck up water or other liquids, especially carpet cleaning solutions, which may cause the internal parts to become damp or waterlogged, short-circuiting the electronics.
  7. Do not suck toner powder or lead powder from batteries. Do not use this product in hazardous or industrial sites for special vacuuming not intended for floors, regular surfaces, or carpets as this may damage the product, even causing an explosion.
  8. Do not use this product near or on combustible or explosive objects, as there is a risk of fires and explosions.
  9. When using and storing this product, do not place it near heat sources or flames, such as a stove or fireplace, as this will cause deformation and damage to the vacuum cleaner casing. Do not expose it to rain, and store it in a cool and dry indoor location. Do not store or use this product near dangerous objects.
  10. When cleaning stairs, pay extra attention to safety and use caution to avoid falling.
  11. Do not wet the body of the machine, as this may cause fires and electric shocks due to short circuits in the vacuum cleaner.
  12. This product cannot be used to vacuum carbon powder or lead powder from batteries.
  13. Do not operate this product in unattended environments, and switch it off when not in use, or in need of maintenance or troubleshooting.
  14. Frequently check the electric wire of this product and the charger for damage, and do not use damaged products.
  15. Please use the designated accessories specified in the manual. The use of non-designated or non-original accessories may result in danger or damage to the vacuum cleaner, and warranty coverage will be void.
  16. The manufacturer and seller do not accept any responsibility for any consequences resulting from improper use or operation by the consumer.
  17. This product is equipped with an electric floor brush. Please ensure that hair, clothing, fingers, and other body parts are kept away from the brush head and moving parts during use.
  18. This product is only for cleaning dry garbage and cannot be used to vacuum liquids.
  19. Do not disassemble the battery yourself or dispose of it in a fire to avoid the risk of a battery explosion.
  20. Under extreme usage and temperature conditions, batteries may leak. If the leaked battery fluid gets on the skin, rinse it immediately with water. If it gets into your eyes, rinse it with water and seek medical treatment immediately.
  21. This product is equipped with a special lithium-ion battery and charger. Do not replace the battery yourself or use other chargers to avoid damaging the product or other dangers. This charger is only suitable for this machine and should not be used to charge other battery packs to prevent danger.
  • Attention!
  1. Do not vacuum sharp objects, such as glass shards, pins, or paper clips, as these objects may damage the filter.
  2. Please ensure that the filter is properly installed before using this product. Otherwise, it may cause damage to the product, and the warranty coverage will be void.