Cart
/

Electric Food Chopper Stainless Steel DDJR002 User Manual English Version

Ⅰ. Technical parameters

Product name

Food processor (meat crusher)

Model No.

DDJR002

Rated voltage

220V-

Rated frequency

50Hz

Rated power

300W

Cup material

304 stainless steel / thickened glass

Ⅱ. Product Structure

No.

Name

Function

1

Gear switch

Used to control product switch and fast and slow motor speed

2

Motor components 

Main parts, with components (e.g. electric switch) inside

3

Transparent cover

Covered on the meat cup for safety protection

4

Container (thickened glass bowl, stainless steel bowl)

Used to store food

5

Blade components

Used for chopping food

6

Non-slip pad

Used for machine anti-skidding

Ⅲ. Use method

  • Use steps
  1. Remove the main unit and cup cover, place the stainless steel bowl/glass bowl in a flat place, and then place the non-slip pad under the bowl.
  2. Take out the plastic blade sleeve used to protect the blade.
  3. Make sure the meat cutter is put on the rotating shaft in the middle of the bowl.
  4. Put in food (refer to food weight/ work schedule);
  5. The ingredients added shall not exceed the upper limit of the maximum mark of the bowl.
  6. Cover the bowl cover, and then put the main unit on the bowl cover, check whether it is placed flat and neat, and make sure that the main unit is installed with the meat cutter and bowl cover.
  7. Insert the power cord and connect the power.
  8. Hold the main unit by hand, press the switch, and the machine starts to work. Release the switch, it stops working (refer to food weight/ work schedule);
  9. After the machine stops working, please do not take off the main unit immediately. After the blade components stop rotating, unplug the power plug and then take off the main unit.
  10. Open the bowl cover. Take out the meat cutter first, and then take out the food.
  • Recommended food weight/ work schedule

Recommended food

Recommended weight

Maximum chopping and mixing time

Remarks 

Pork

Approx. 300g (cut into small pieces of approx. 2cm first)

30s

Remove bone, skin, and tendon and use II gear. Adjust the working time according to your taste. Generally, it can be completed in 8-20 seconds

Beef

Approx. 300g (cut into small pieces of approx. 2cm first)

30s

Remove bone, skin, and tendon and use II gear. Adjust the working time according to your taste. Generally, it can be completed in 8-20 seconds

Garlic

Approx. 300g

30s

Use I gear. Adjust the working time according to your taste. Generally, it can be completed in 15-20 seconds

Pepper

Approx. 300g

30s

Use I gear. Adjust the working time according to your taste. Generally, it can be completed in 15-20 seconds

Carrot

Approx. 300g (cut into small pieces of approx. 2cm first)

30s

Use I gear. Adjust the working time according to your taste. Generally, it can be completed in 15-20 seconds

Vegetables

Approx. 300g

30s

Use I gear. Adjust the working time according to your taste. Generally, it can be completed in 15-20 seconds

  • Remarks:
  1. Please refer to the operation of similar food in the table above for the food not indicated in the table;
  2. Use inching function for single-gear vegetable cutting.
  3. The meat cutter is very sharp. When taking out, take care not to cut hands or other parts of the human body.
  4. Please do not put water higher than 50 ℃ water or food ingredients into the bowl for processing, to avoid deformation of the main unit by heat.

Ⅳ. Maintenance

  1. After use, please unplug the power plug from the power socket in a timely manner.
  2. The blade components can be disassembled and cleaned. For safety, it is recommended to wear gloves.
  3. After cleaning, it can be assembled after drying. The blade shall be well covered with a sleeve to avoid cutting the hand.
  4. All parts can be cleaned with detergent and a sponge. Do not use hard steel wire to avoid causing damage to the surface.
  5. Do not immerse the whole machine in water. The external surface of the product can only be wiped with a wet towel. Do not wash it with water to avoid electric leakage and fault.
  6. In case of no use of the product for a long time, please clean and put it in the packaging box, and put it in a ventilated and dry place, to avoid from getting damp and affecting use.

Ⅴ. Points for Attention

  1. Do not use power other than 220V AC, otherwise, it may cause electric shock or fire hazard. Please use a separate socket for the specifications above
  2. For specifications above 6A, please use a separate socket. If the socket is shared with other electrical appliances, the wiring part of the socket may cause heating, fire, and other anomalies.
  3. Hold the plug of the power cable and gently insert it into the power socket.
  4. Don't scratch the machine with hard iron objects.
  5. After the machine is used, the power cord must be unplugged, otherwise, electric shock, leakage, and fire may occur.
  6. This product should not be used for processing hard products, such as bone-in meat, coffee beans, pepper, pepper, frozen or frozen food.
  7. Cutting temperature range: 0-50℃, it is strictly prohibited to put the cutting cup into the microwave oven for heating or put things beyond its temperature range into the cup.
  8. Before adding food, please check whether the blade is properly installed and running properly. If the blade does not rotate or rotates slowly, remove the plug first.
  9. After adding food, please check whether the blade deviates from the correct position. If the blade cannot run quickly within a few seconds, please unplug it first. Remove too much food, and then continue with the electricity.
  10. The blade is very sharp. Please hold the blade bar while disassembling and installing the blade.
  11. The continuous working time of the product shall not exceed 30 seconds. After 30 seconds of continuous work, rest for 2 minutes before use. Work for 30 seconds and rest for 2 minutes in a cycle. After three cycles, the interval time for re-use is 15 minutes. Please wait until the motor cools down before working.
  12. If the power cord is damaged, it must be replaced by professionals from the manufacturer, its maintenance department, or similar departments to avoid danger.
  13. The blades are sharp, so be careful when removing them, emptying the mixing bowl, and cleaning.
  14. If the product stops working during operation, it may be caused by the temperature control protection of the motor. Please turn off the power and wait for 20-30 minutes of cooling before use.
  15. Products should be kept out of reach of children. Do not allow persons (including children) with physical disabilities, sensory or mental disabilities, or lack of relevant experience and knowledge to use or play with this product.