Shopping Cart

Hair Dryer Brush RFSH001 User Manual English Version

Ⅰ. Specification parameters

Product name

Model No.

MFG Code

Rated Voltage

Rated Power

Rated Frequency

Hair Dryer Brush






Ⅱ. Product diagram

  • Parts identification

  1. K Head 
  2. Connector button 
  3. Display screen 
  4. Main body 
  5. Power Switch/Speed Selector (0=OFF Position  1=Low: low speed 2=HIGH: high speed)

  • Introduction of the Attachment
  • Blow Brush:
  1. Use for a natural hairstyle. Take a small amount of hair and brush from the inside pulling it down gently. Use your free hand to support the motion.

Ⅲ. Using the Hair Styler

  1. Stop using it immediately if the hair styler does not produce air constantly and the cord or plug is damaged or becomes hot, or the plug fits loosely in the outlet.
  2. Never insert foreign objects into either the air inlet or outlet.
  3. Do not use the hair styler near inflammable material such as benzene, paint thinner, sprays, etc.
  4. Do not use the hair styler while your hands are wet.
  5. Do not use or place the hair styler in an area with high humidity. Do not submerge the hair styler in water.
  6. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
  7. Children should be supervised to ensure that they do not play with the appliance.
  • Repairing the Hair Styler
  1. Do not attempt to repair, disassemble or modify the hair styler by yourself.
  2. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
  3. If the cord or plug is damaged, stop using it immediately and contact an authorized service center.

Ⅳ. Cleaning

  • Never run the appliance underwater or submerge it in water. Unplug the appliance and allow it to cool down before cleaning. Clean the appliance with a soft, dry cloth to wipe away residue or dust. A lightly damp cloth may be used with caution.

Ⅴ. Safety Instructions

  • Please read the safety instructions before using this hair styler. The safety instructions explained here are to help you use this hair styler safely and correctly, and also to prevent you from injuring yourself or others.
  • WARNING: Not following the instructions below may cause fire, burns, explosion, short-circuiting or electric shock.
  • Electrical Conditions

  • WARNING: This symbol on the hair styler means“Do not use this hair styler near water”. Do not use this hair styler near bathtubs, showers, basins, or other vessels containing water.
  1. Always switch off the hair styler (“0” position) after use and before unplugging it from the power socket. Unplug it from the power socket when not in use. Always grasp the plug while unplugging. Failure to do so may lead to fire and/or an accident.
  2. Before connecting the hair styler, check that the voltage of the hair styler corresponds to the local voltage.
  3. Do not cut, damage, or modify the cord. Do not pull, twist or bend the cord with unnecessary force. Do not place heavy objects on the cord or allow them to get pinched in between objects. Do not wrap the cord around the hair styler as it may cause fire and/or electric shock. If the cord is damaged or becomes hot, stop using it immediately.
  4. When the hair styler is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hairstyle is switched off.
  5. For additional protection, the installation of a residual current device(RCD) having a rated residual operating current not exceeding 30mA is advisable in the electrical circuit supplying the bathroom, Ask your installer for advice.
  • Caution
  1. Do not put your hands on the air outlets or use them if they are damaged. You may get burned.
  2. Only use the hair styler for drying and styling human hair. Do not use it for children.
  3. Do not use the hair styler if it is damaged.
  4. Do not touch the attachment as it becomes hot during and after use.
  5. Make sure hair does not get sucked into the air inlets.
  6. Do not use thinner, benzene, or any other solvent to clean the hairstyle.