Dear use in order to make you use this products correctly, Please read this manual carefully before use
This product is a high-grade ironing appliance, which is suitable for household use. It's an ideal ironing appliance for cleaning and ironing fabrics. Beautiful design makes the product more elegant. The product is suitable for ironing and disinfecting clothes, curtains and carpets of different materials. It's easy to use, convenient to operate and saves energy and time.
Please check before use
Check whether the steam pipe and water inlet are blocked. If there is any blockage, please remove the blockage. If the power cable is damaged, please do not dismantle the machine without authorization. Please return it to our company for repair or find a professional to repair and replace it.
Safety protection device:
Power indicator display Rotary switch, freely adjustable Z.thermostat
Control the heater to work between the limited temperature, effectively preventing the danger caused by too high temperature.
When the heating temperature rises too high, the thermal fuse will fuse, which can automatically protect and prevent danger.
l.lf the power cable, plug and air duct are damaged, they must be repaired and replaced by our company in order to avoid danger.
When using the product, Please pay more attention to prevent the danger caused by steam splashing.
When adding water and cleaning, the power cord should be pulled out
l.Please use the correct power supply voltage and frequency :220-50 Hz, do not share the same power supply with other high-power electrical appliances. Brief introduction: 2.lt can't be placed in water, Liquid.3.Do not add hot water into the water tank, which will cause deformation of the water tank.
4.Pay attention to the safety of plug, socket and power supply. Do not drag or pull the plug
5.lf the power cable is damaged, please return to the factory for repair or replacement Catalog
6.It is forbidden to start the power supply before adding water
This product is only for indoor use
The product can only use socket with grounding wire Please check before use:
Do not use the product on the table or chair, only use it when the product is on the ground
Always check the power cable and pipe for damage ll. Before use, be careful that hot water will be ejected from the hole
12.Don't touch the hot position and hot brush head, and pour the residual water carefully to avoid scalding. 13.Don't pull out the pipe during use.
Please don't leave while the product is powered on
During use the product, don't let the power cable contact with the pipe and high temperature steam
Don't let the plug contact with the heating position. After use, let the device cool down and then pour the water. If it is not used for a long time, please remove the water and pull out the plug.
Please return to the factory for repair when the parts are damaged. Incorrect repair will cause damage, fire and electric shock.
Let the device cool naturally after use. When the heating temperature rises too high, the thermal fuse will fuse, which can automatically protect and prevent danger.
When don't use, please pull out the power plug
This product is not recommended to be used by people (including children) who are physically unsound, feel or mentally handicapped or lack relevant experience and only, unless the person responsible for their safety supervises and instructs them to use this product.
ChiLdren should be taken care of to ensure that they do not play with the product
Do not immerse the product in water or rinse with water. Be careful of the hot steam, which may cause burns.lt s forbidden to plug the plug with wet hands to avoid electric shock or fire, this products correctly. It is strictly forbidden to disassemble the machine without authorization. In case of failure, please return it to the sales shop
Screw the pipe to the steam port of the device and tighten it directly
Insert the adjustable tube into the device hole, directly press it to the end, or it will shake unsteadily
Open the snap and lengthen the tube,there are three sections of the tube.
Fix the ironing board on the adjustable tube and press it down slowly from the top of the adjustable tube
Install the hanger rod on the hanger
Put the top of the adjustable tube at the bottom of the hanger
Please place the steam nozzle on the hanger, and the garment steamer installation is completed
Insert the ironing board bracket into the ironing board ,please insert it tightly
The bracket hole of ironing board is directly inserted into the top of adjustable tube
3.Method of adding water
Turn on the water tank knob and fill the tank with water. After filling with water, tighten the water tank knob, then put the water tank into the device.
Faults and problems
power didn't connect
Check the power cable and socket
didn't turn on the device
Turn on the device
fuse is bumtout
Ask a professional to repair it
indicator light is off
power plug is loose
Have noise or little steam in the pipe
The brush head is too low
Raise the pipe and brush head
Brush head water leakage
Brush head break
Replace the brush head
Vertical up and down operation
Water leakage at pipe connection
Seal ring aging
Replace the seal ring
Water leakage at water tank
Water tank break
Replace the water tank
Little steam output
The voltage is too low
Turn off the high-power electrical appliances and use them after the voltage is stable
The pipe is blocked
Clean the pipe
Water tank deformation
Add superheated boiling water
Replace the water tank
Added chemical reagent
No steam but the indicator light is on
Ask a professional to repair it
No steam output
Steam condensation in the pipe
Raise brush head Let the condensate flow back to the thermostat
Water tank capacity
Introduction to cleaning and maintenance Cleaning and storage
Be sure to unplug the power cable before cleaning and maintenance
Do not wash the device with water directly; wipe it with a soft cloth with a little neutral detergent, and do not use solvents such as gasoline
After cleaning and maintenance, it is necessary to wait until it is fully dry before using or storing it
4.lf it is not used for a long time, please clean the product, wait for it to dry, retract the adjustable tube, remove the pipe, remove the hanger, put it back in the original packaging box, and store it in a cool and dry place
Cleaning methods of dirt and sediment
Mix 50% vinegar and 50% water, about 900ml
Pour the mixture into the device from the pipe connection
Let the mixture fill half of the water tank
Wait 40 mins
5.Open the drain valve at the bottom of the equipment to drain the mixture
Remarks:Change the mixture into clean water and repeat the operation several times according to the above steps to achieve the cleaning effect
This product is designed and manufactured with high quality materials and original parts, which can be recycled and reused. Please dispose according to Local laws and regulations. Do not treat waste products as general household waste. Proper disposal of waste products will help to avoid negative impact on environment and human health