INSTRUCTION MANUAL
For your safety, please read this manual carefully before use. Improper operation may cause product damage or even personal injury. Please keep this manual for future use and maintenance.
warning
Remind you of the risk of possible harm to your health and safety.
Be careful
Remind you of the risk of possible injury to this product or other objects.
Child safety
Warning: for the sake of children's safety, special attention should be paid to the following:
■ this product cannot be used by children or people who are not physically sound, mentally handicapped or lack of relevant experience and knowledge, unless someone responsible for their safety supervises or guides their use of this product;
■ take good care of the product and store it out of the reach of children and people who are unable to judge the danger nearby;
■ when the product is working near or operated by children, special care shall be taken, and extra care shall be taken. When charging the product, pay attention not to trip the children on the charging line;
■ the packaging and plastic bag of this product should avoid children's play, which may cause suffocation;
■ do not use this product as a toy for children to play, so as to avoid danger;
Product range
Warning: in order to reduce the risk of fire, electric shock and personal injury, the following situations are absolutely prohibited and special attention shall be paid:
■ this product is only suitable for household use, not for commercial use, do not use this vacuum cleaner outdoors, and avoid using this product in the environment close to heat source, sun exposure and high humidity (such as rain). Do not immerse the product in the liquid, and keep away from sharp objects to avoid damaging the product. Do not use the product for other purposes other than those specified in the manual;
■ pay attention to hair, fingers and other parts of the body, which may touch internal parts and cause electric shock or damage;
■ do not suck sharp objects, such as glass fragments, pins, paper clips, etc., which may damage the filter;
■ before dust absorption, please ensure that all filters are installed in place, otherwise the product may be damaged and the warranty will be invalid.
Packing list
Note: please take out all the items in the carton and check the parts in the carton. Check each attachment against the list. If any parts are missing or damaged, please contact the dealer in time.
NO. |
Name |
Number |
1 |
Vacuum cleaner host |
1 |
2 |
Circular brush |
1 |
3 |
Hair brush |
1 |
4 |
Recharge stand |
1 |
5 |
Adapter |
1 |
6 |
Instructions |
1 |
Product technical parameters
Product category: Cordless Vacuum Cleaner Product model: XCQH007
input voltage: 100-240 ~ output voltage: 13.5V DC
Vacuum cleaner voltage: 11.1V Vacuum cleaner power: 100W
Maximum vacuum: ≧12kPa
Technical parameters shall be subject to the standard test environment
Operation
Vacuum cleaner charging
Warning: please turn off the vacuum cleaner before charging.
Note: it takes more than 4 hours to fully charge the vacuum cleaner after it is fully discharged.
1.Insert the power adapter connector into the charging jack, and then insert the adapter plug into the power socket for charging
- When charging, the battery indicator will flash continuously until the battery pack is fully charged.
- After the battery pack is fully charged, the power indicator (3 grid power indicator) will be on for about 15 seconds and then off.
Note: when the power switch is pressed, the vacuum cleaner does not work and the power indicator light is 1 grid flashing, the battery pack needs to be connected to the switch power adapter for charging.
Use of vacuum cleaner
Warning: do not use the vacuum cleaner without a filter installed.
- Select appropriate accessories to insert into the hand-held suction port of the vacuum cleaner according to the cleaning needs, and ensure the installation in place.
- Press the power switch once to start the vacuum cleaner. The starting gear is low speed.
- Press the speed regulating button once to set it to high speed, and then press the speed regulating button once to set it back to low speed.
- After use, press the power switch once to turn off the vacuum cleaner.
Use of accessories
- Use of circular brush
Circular brush is suitable for cleaning a soft material surface, such as a bed, sofa, fabric, curtain, car cushions and other places. Wall corner, aluminum alloy door and window frame, drawer, car cushion, keyboard and other places.
- Use of hair brush
The brush is applicable to the surfaces that need to be brushed with wool at the same time of suction, such as corners, aluminum doors and windows, drawers, keyboards and other places.
Maintenance
Warning: before any maintenance, make sure the vacuum cleaner is closed and the whole machine is not charged, otherwise electric shock or other personal injury may be caused.
Dust removal cup
Warm tip: in order to achieve the best vacuum effect, please empty the dust cup in time after each use. Do not use the vacuum cleaner without the filter installed.
- Put the hand-held vacuum cleaner on the top of the garbage can and press the release button of the bottom cover of the dust cup to pour out the dust.
- After cleaning, close the lower cover of the dust cup, and a click can be heard when it is completely closed.
Clean HEPA filter and prefilter
Warm tip: using a clean filter can keep the best vacuum effect of the vacuum cleaner, and cleaning the filter in time after each use can keep a good vacuum performance
- Check the filter frequently. When there are many hairs and fibers on the stainless steel filter screen and there is obvious dust accumulation on the surface of HEPA filter, please clean it in time.
- Hold the dust cup in one hand and move the release button of the dust cup to the right with fingers in the other hand to remove the dust cup.
- Take the HEPA components out of the dust cup with the steel wire handle of HEPA, pat the stainless steel filter screen gently or brush off the dust on the filter screen with a soft bristle brush.
- HEPA can also be further taken out of the HEPA assembly.
After unscrewing in the direction marked on the part, HEPA can be taken out from the stainless steel filter screen.
5. Gently pat or brush off the dust on the HEPA with a soft brush.
Stainless steel strainers and HEPA can also be cleaned with warm water. After cleaning, put the stainless steel filter screen and HEPA in the air circulation place to dry naturally, 24 hours is recommended.
Warm tip: do not use dirty water for cleaning, do not put stainless steel filter screen and HEPA in a humid place. Do not dry the filter by exposing it to the sun or using a hair dryer, which may damage the filter and shorten its service life.
Warning: the cleaned stainless steel filter screen and HEPA must be dried before use; if the filter is not dried, it may cause product damage or other personal injury and property damage.
After HEPA has been cleaned or used for several times for a period of time, it will affect the suction of the vacuum cleaner. It is recommended that the user purchase a new HEPA at the designated after-sales center in time to replace it, so as to maintain the suction of the product.
- If the HEPA needs to be replaced, rotate it in the direction of the arrow as shown in the figure, take the HEPA out of the retaining ring, take out the new HEPA, rotate it according to the arrow as shown in the figure, and fix the HEPA
- Install HEPA into stainless steel filter screen, and pay attention to gap alignment
- Put HEPA components into the dust cup, and pay attention to the gap alignment with the raised part of the dust cup
- Install the dust cup into the host, first align the two hooks at the front of the dust cup with the two grooves of the host, then select the dust cup along the axis, hear a click, and make the groove at the back of the dust cup enter the dust cup release button.
Fault and repair
If problems are found in the use of the product, please check the problem points and solutions in the table below. If the problem still cannot be solved, please contact the after-sales service center.
Warning: please turn off the vacuum cleaner before maintenance, otherwise it may cause electric shock or other personal injury.
Problem |
Possible causes |
Solution |
Not running |
1.The battery is dead. |
1.Follow the instructions on page 7 to charge the battery |
Power indicator is not on |
1. The battery pack is damaged. 2. The power adapter is not powered on. 3. The charging wire is not fully inserted into the charging jack. 4. There is foreign matter or dust accumulation on the metal contact of the charger or battery pack. 5. The power socket is damaged 6. Power adapter is damaged |
1. Contact the maintenance point and replace the battery pack. 2. Make sure that the charger, battery pack and power socket are in good contact. 3. Make sure that the charging wire and charging socket are in good contact. 4. Make sure that the metal contact of charging contact is in good contact without foreign matters or dust accumulation. 5. Replace the normal power socket 6. Contact customer service to purchase power adapter |
Weak suction |
1. The dust cup is full. 2. The filter needs to be cleaned. 3. The filter needs to be replaced. 4. The battery pack power is low 5. The suction port is blocked |
1. Clean the dust cup. 2. Clean the filter according to the instructions on page 9 3. Contact customer service to purchase and replace filter 4. Charge the battery according to the instructions on page 7 5. Clean the suction port according to page 9 |
Dust leakage of vacuum cleaner |
1. HEPA filter is not installed 2. HEPA filter installation position is not accurate 3. HEPA filter is damaged and needs to be replaced |
1. Check whether HEPA filter is installed correctly, see page XX 2. Install HEPA filter accurately according to the instructions on page 10. 3. Contact customer service to purchase and replace HEPA filter |
Automatic stop of vacuum cleaner |
1. The battery pack is discharged. 2. The suction port is blocked and the pipe of the pole is blocked, which causes the temperature of the hand-held vacuum cleaner to be too high. 3. The filter is blocked |
1. Charge the battery according to the instructions on page 7. 2. Clean the suction port according to page 9, cool the hand vacuum cleaner to normal temperature and restart it. 3. Clean HEPA filter, dust cup and prefilter according to the instructions on page 12 |